Giromax® Guttercoat System - Gutter Repair Coat

Guidance for specification option:

Available with a 15 year material warranty.

Guidance for specification option:

• Remove all silt, moss, foliage and debris from the gutter.
• Remove all corrosion to ST3 standard of EN ISO 8501-1:2007 using scrapers and abrasion methods.
• Ensure that the edge of any remaining coating is firmly adhered and well feathered.
• Key surface but ensure it is not polished.
• Remove rust staining and swarf etc.
• Wipe down with Giromax® Panel Wipe.
• Consult manufacturer’s literature for details.

Giromax® Basecoat.

Guidance for specification option:

• A two- part moisture tolerant coating.
• Used in the Giromax® Guttercoat System specification to treat substrate corrosion on metal gutters and to encapsulate asbestos gutters.
• Wholly pour Part B (Activator) into Part A and mix thoroughly. Do not part mix.
• Brush or roller apply one coat Basecoat to the correct film thickness throughout the gutter and around joint bolts.
• Consult manufacturer's literature for details.

Giromax® Guttercoat.

Guidance for specification option:

• A one-part, moisture tolerant coating supplied ready to use.
• Used to provide a durable protective coating on gutter systems.
• Apply on completion of preparation, joint treatment, and Basecoat application.
• Brush or roller apply one coat of Giromax® Guttercoat to the entire gutter surface to the correct thickness.
• Consult manufacture’s literature for details.

Giromax® Sealant.

Guidance for specification option:

• A one-part, moisture tolerant sealant. 
• Used in the Giromax® Guttercoat System specification to seal gutter joints.
• Following Basecoat application, gun apply Sealant to the gutter joint in a continuous line.
• Tool with one coat of Giromax® Guttercoat brush applied ‘wet on wet’ to achieve a smooth fillet that covers, encapsulates and visually obscures the leading edge of the overlapping plates and joint bolts.
• Consult manufacture’s literature for details.