NBS Source
I'm a manufacturer
Compare variants

Halfen Detan Rod Systems

Verified by manufacturer 4 months ago

SS/5 500 Tension System

Leviat Variant:

High performance tension bar system to restrain roof timbers, canopies, masts and areas of glazing.

Jump to:
BOS
 +44 (0) 114 275 5224 Website

Application

Suitable for applications that demand corrosion resistance. Stainless steel option offers a maintenance-free life and is the ideal solution where an attractive polished finish is required.

Description

High performance tension bar system, available in stainless steel and carbon steel, typically used to restrain roof timbers, canopies, masts and areas of glazing.


Features and benefits:

  • The system can be extended over the maximum bar length by the inclusion of couplers or anchor discs/ cross couplers.
  • Isolation supplied as standard with stainless steel systems.
  • The fork connectors and couplers are designed to allow adjustments to be made to the system length without the need for turnbuckles.
  • European Technical Assessment.
  • Available in sizes from 8–42 mm in stainless steel and 10-76 mm in carbon steel.
  • Can be used to create a variety of assemblies from simple tie bars to complex bracing systems involving several bars joined at one point.
  • Special anchor plates and discs can be manufactured to suit project requirements and connecting plates designed to suit particular applications.

General information

Finish

Satin

Polished

Electro polished

Painted

Galvanized

Material

Stainless steel

Carbon steel

Shape

Circle

Square

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_20_85_84_89 Tension strapsPrimary

CAWS

G12/30 Proprietary

G12/330 Proprietary metal members

Product range

Tension and Compression Systems

Specification data - Tension straps

Standard

European Technical Assessment.

Material

Carbon steel.

Stainless steel.

Finish

-

Manufacturer guidance

  • Bar finish: Bright drawn.
  • Fork and nut: Satin polished.
  • Coupler: Satin polished.
  • Disc: Satin polished.
  • Cross coupler: Satin polished.


Bar diameter

M10.

Guidance for specification option:

Carbon steel and Stainless steel.

M12.

Guidance for specification option:

Carbon steel and Stainless steel.

M16.

Guidance for specification option:

Carbon steel and Stainless steel.

M20.

Guidance for specification option:

Carbon steel and Stainless steel.

M24.

Guidance for specification option:

Carbon steel and Stainless steel.

Show more

System length

Guidance for specification option:

System lengths are measured between the centres of the pins in the forks.

Components

Fork connectors and locking nuts.

Guidance for specification option:

  • Fork connectors are supplied with a locking nut. Forks and their locking nuts have left or right hand threads, and are supplied complete with a pin.
  • Each stainless steel fork is supplied with two clear, self-adhesive, PET (polyester) washers to isolate the system from a connecting plate of a dissimilar metal.

Pins.

Guidance for specification option:

  • Two-part locking construction and once installed are flush with the fork.
  • Stainless steel pins are supplied with a PTFE coating around the barrel to isolate the system from a connecting plate of a dissimilar metal.

Tie bars.

Guidance for specification option:

  • Tie bars have a right-hand thread at one end and a left-hand thread at the other.
  • Flats are pressed into the bar close to each end to allow the bar to be screwed into the fork connectors.
  • Carbon steel bars are available either untreated with the electrodeposited zinc coating Fe//Zn12//A to EN 12329 or are hot-dip galvanized to EN 1461.
  • Stainless steel bars are bright drawn as standard or hand polished when required.

Couplers.

Guidance for specification option:

  • Couplers have right and left hand threads and are used in applications where more than one bar is required between forks.
  • Supplied with locking nuts for each end of the coupler.
  • Couplers are machined from bar and can have the provision for a hanger to be fitted to limit the deflection of bars of 16 mm diameter or greater.

Anchor discs.

Guidance for specification option:

  • Allow up to eight bars to be connected together.
  • Can be used at the centre of conventional cross-bracing, or where several bars need to be connected at one point.
  • Machined from plate and can be supplied with a surface finish to match the system.

Show more

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Vectorworks
 -

1

Revit
 -

1

AECOsim
 -

1

IFC
 -

1

ARCHICAD
 -

1

Literature

Tension and Compression Systems

Tension and Compression Systems

Similar products from Leviat

Halfen Compression Systems

Halfen Compression Systems

© 2024 NBS Enterprises Ltd. All rights reserved.