Hawa Concepta 25/ 30/ 40/ 50 - Door furniture

Furniture hardware for pivot sliding cabinet doors with a maximum panel weight of 25, 30, 40 or 50 kg.

Features and benefits:

• Door width: 300–900 mm (300–750 mm for Hawa Concepta 25).
• Suitable for door panel thickness of 19–50 mm.
• Slides doors alongside cabinet bodies or into wall recesses.
• Room-high designs and walk-in cabinets are easy to implement.
• No obstructions in the form of protruding doors.
• A wide range of combinations are possible.
• Helps to utilize available room space.
• The door will automatically be pulled into the socket.
• Shock absorber in the end positions provides a high degree of movement comfort and stops the door gently and quietly when it is pulled out.
• Scissor technology accommodates large and heavy doors.
• All necessary adjustments can be made from the front.
• Wall recesses can be concealed without a cabinet body.
• The same components can be used for both right and left-hand stacking.
• The connector profile makes it easier to assemble cabinet designs, with doors striking against the top and bottom cabinet sections.
• The maximum weight must be adjusted in accordance with the size of the doors, consult manufacturer for further details.
• LGA certified.

Components:

Quantities of each component will vary dependent on variant specified, consult manufacturer for details.

• Upright, aluminium plain anodized (1800 mm for 25878, 2300 mm for 25879, 2500 mm for 25880, 2760 mm for 25881).
• Scissor action, complete, galvanized steel (900 mm for 25878, 1500 mm for 25879, 1500 mm for 25880 and 25881).
• Front scissor guide, aluminium plain anodized.
• Rear scissor guide, aluminium plain anodized.
• Rear scissor bearing, galvanized steel.
• Concealed hinge, spring-loaded for wooden door, galvanized.
• Plastic spacer profile (860 mm black), pre-drilled.
• Plastic brush guide (black).
• Two-wheeled trolley aluminium with ball bearing wheels, height-adjustable with torsion plate (dull nickel finish – 25880 and 25881 only).
• Upright guide with zero clearance and plastic rollers.
• Bottom guide channel aluminium plain anodized, predrilled (728 mm for 25878, 896 mm for all others).
• Top track 896 mm, aluminium plain anodized, predrilled (25880 and 25881 only).
• Stop damper with retaining bracket.
• Door pull-in with end position, soft closing system (plastic, black).
• Adjustable depth stop cover cap, top left/ bottom right.
• Adjustable depth stop cover cap, top right/ bottom left.
• Stainless steel cover plates.
• Soft closing system for end position and cover caps for scissor guide.
• Set of screws for concealed hinges (4 x 16 mm).
• Screw set for fitting hardware to cabinet body (4.5 x 20 mm).
• Screw set for spacer profile (4 x 16 mm).
• Hex key (3 mm with handle).
• Plastic installation aid (red).