HD1054 Double Timber Stud Wall

The HD1054 acoustic insulation system delivers a very effective sound insulation solution for double timber stud walls by combining high performing Hush Slab sound absorbers and acoustic plasterboard.

It is a fully tested complete system that provides separation by allowing the creation of a lightweight stud wall featuring a clear 50mm gap between the two timber studs.

It is suitable for use all kinds of in new build, conversion and refurbishment projects with the assurance that is complies with the standards set out in all UK Building Regulations. This includes Approved Document E (England & Wales), Section 5 (Scotland) and Part G (Northern Ireland).

Features and benefits:

• Can be used in new build, conversion and refurbishment developments.
• Building Regulations Approved Document E (England & Wales), Technical Handbook Section 5 (Scotland) and Technical Handbook G (Northern Ireland) compliant.
• A tried and tested method of creating a separating lightweight stud wall.
• Excellent acoustic performance due to the clear void between the two stud frames.

How HD1054 is formed:

• Create two frames of 50x100mm timber stud work.
• Isolate the stud and track from the floor and ceiling structure using the Hush Heavy Duty Isolation Tape.
• Ensure there is a minimum 50mm clear gap between the two stud frames which remains clear.
• Insulate within the stud frames using the Hush Slab 100 Sound Absorber. This must be installed tightly within the stud frame and continue to ensure the cavity between the frames remains clear.
• Face each stud frame with two layers of 15mm Soundbloc plasterboards.
• Seal the perimeters of the plasterboards using Hush Acoustic Sealant.

Acoustic Performance *

Airborne (DnTw) - 62 dB

Airborne (DnTW+Ctr) - 55 dB

* Results are based on all Hush materials listed in the Hush System HD1054 data sheet being used. Results are also based on correct installation and all flanking paths being treated.