HFP Latitude 2–8 Loop Control Panel (5.25A PSU) With Key Switch, 0–144 Zone LED’s

The Latitude product range of fire alarm control equipment combines the very latest hardware and software to produce a control and indication system, which is powerful and sophisticated, yet simple to use and understand.

The flexibility of the platform is such that it can be re-configured to realize many other control and indication applications, with direct integration into intelligent buildings.

The concept is designed to add value to System Designers, Integrators, Service Providers and the end users.

Developed from the 'ground up' by Hochiki’s leading design team and using some of the most advanced technology available, it is designed as one of the most powerful, intelligent and technically robust fire alarm products available.

The modular nature of the system allows all field wiring to be connected to a passive mother board enabling addition, re-configuration or replacement of all electronic hardware without the need to disconnect any field wiring.

This modularity also allows each panel to be customized with addressable loop detection circuits, conventional detection circuits, relay cards, additional sounder outputs or programmable I/O modules as required.

Feature and benefits:

• Compliant with EN 54-2, EN 54-4, EN 54-13.
• Two to eight loop version.
• 500 mA loop current.
• Four programmable sounder circuits each rated at 2.5 A.
• 5.25 A or 10.25 A, power supply options.
• Three programmable inputs.
• Five programmable relay outputs.
• Hard wired fire and fault routing inputs and outputs.
• Up to 512 programme Input/ Output via optional plug in and serially connected expansion cards.
• Modular electronics.
• Over 4000 sub address points per panel.
• Option to 'invert' inputs and outputs.
• Powerful, standard configuration templates.
• Network up to 127 panels.
• Configurable via USB port to PC or memory stick.
• Two ancillary serial ports.
• Detection loop current: 500 mA each.
• Auxiliary 24V supply 1 and 2: 24 V d.c., fused at 500 mA.
• Programmable inputs: Three, activated by volt free contacts.
• Auxiliary Serial port A RS232 programmable.
• Auxiliary Serial port B RS232 programmable.
• Ancillary I/O board serial port RS485 programmable.
• Fire Routing (Ifam) serial port RS485 programmable.
• USB host port: USB type A.
• USB device por:t USB type B.
• Fire routing output: Monitored.
• Fire routing input: Monitored.
• Fault routing output: Monitored.
• Fault routing input: Monitored.
• Extinguisher output: Monitored.
• Extinguisher input: Monitored.
• Extinguisher fault input: Monitored.
• Event log: 10,000 events, 1 second resolution. Filterable and printable.
• Software zones: 2000.
• Software groups: 5000.