IKO tanetech R EC/UV - Single Component Cold Applied Liquid System for Flat and Pitched Roofs - Flat roof system
Verified by manufacturer 5 months ago
IKO tanetech R-UV
IKO tanetech R-UV
Single component liquid waterproofing system.
Application
R-EC:
- IKO tanetech R-EC is used as a fully reinforced first waterproofing layer in the liquid waterproofing system.
- With next-to-excellent flow properties, IKO tanetech R-EC also provides excellent adhesion to the most common roof substrates.
R-UV:
- IKO tanetech R-UV is used as the second waterproofing layer in the liquid waterproofing system.
- IKO tanetech R-UV has good resistance against UV degradation and thermal stability.
Description
The IKO tanetech R EC/UV liquid applied waterproofing system consists of a single component, two or three layer coating based upon PU with a glass fibre reinforcement. The reinforcement provides robustness and thermal stability, while the UV top coat provides excellent UV resistance and colour fastness. IKO tanetech R EC/UV brings excellent adhesion to most substrates, creating a fully bonded application that prevents water tracking between the waterproofing layers. The system is air moisture triggered and requires no extra catalyst to cure. IKO tanetech R EC is a single component liquid waterproofing base layer applied by a fleece roller or brush. It is supported by glass fibre reinforcement and fully bonded to a substrate when used in conjunction with a range of substrate primers. The IKO tanetech R UV top coat is applied by a fleece roller or brush to the cured IKO tanetech R EC base coat. This application ensures UV resistance, solar reflectively, and colour stability, which culminates in a long-term waterproofing solution. This system can be used on a variety of waterproofing applications, such as flat roofs and profiled metal sheet roofs in both new build and refurbishment projects.
Key benefits to your project
- Only installed by an IKO approved contractor.
- Excellent durability and puncture resistance.
- UV stable top coat for all weather conditions.
- Highly flexible in its design application.
- Wet-on-wet EC application saves time.
- Suitable for both new construction and refurbishment projects.
- Can be applied to existing sound substrates.
- One-component – simple and rapid installation.
- Proven moisture-curing PU technology.
- Backed with a 20 year guarantee.
General information
Color | Grey Black |
Material | Polyurethane (PUR) |
Length | Bespoke |
Width | Bespoke |
Warranty description | 15 year 20 year Manufacturer guidanceDependent on reinforcement used. |
Uniclass | |
CAWS | J31/120 Warm deck roof coating J31/353 Waterproof coating J31/10 Warm deck roof coating |
Product range |
Specification data - Liquid-applied warm roof covering systems
Preparation | |
Horizontal work | IKOpro Bonding Agent.Guidance for specification option: IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C. IKOpro Sprayfast MPP.Guidance for specification option: KOpro Sprayfast MPP (Black, Multipurpose Primer) is a specially formulated high performance bonding primer. It allows the speed of application of the bonding primer to be five times faster than conventional bitumen primers, promoting strong bonds at temperatures as low as 5°C. For self adhesive and torch applied bitumen membranes. |
Skirtings and vertical work | IKOpro Bonding Agent.Guidance for specification option: for self adhesive bitumen membranes only IKOpro Sprayfast MPP.Guidance for specification option: for self adhesive and torch applied bitumen membranes |
Air and vapour control layer | IKO Ultra S-A Air and Vapour Control Layer.Guidance for specification option: Self adhesive for combustible substrates S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps. IKO Ultra T-O Air and Vapour Control Layer.Guidance for specification option: Torch applied to non combustible substrates only T-O VCL (Torch-on) is a high performance vapour control layer for use in adhered IKO Polymeric systems. It comprises an impervious aluminium core, reinforced with polyester and coated with a specially formulated quick melt SBS modified bitumen. The lower surface has a sacrificial film which rapidly melts during the torching operation. |
Insulation | |
Type | IKO enertherm Gold Insulation, 2400 x 1200 mm.Guidance for specification option: Thickness: 30, 50, 60, 80, 100, 120, 140, 150 mm. Consult literature and insert requirements. IKO enertherm Gold Insulation, 1200 x 1200 mm.Guidance for specification option: Thickness: 30, 40, 50, 70, 80, 100, 120,140 mm. Consult literature and insert requirements. IKO enertherm MW, 60 mm thickness.Guidance for specification option: A dual-density stone wool insulation board. It is used for the thermal insulation in a variety of warm flat roofing system applications where a non-combustible and/ or acoustic insulation solution is required. Width: 1200 mm. IKO enertherm MW, 120 mm thickness.Manufacturer guidanceIKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. |
Fixing | IKOpro PU bonding adhesive.IKOpro Sprayfast IBA. |
Carrier membrane | |
Type | IKO Ultra H-A Underlay.Guidance for specification option: IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m. |
Fixing | Bonded by heat activation to primed insulation board (laps heat welded). |
Liquid-applied waterproofing | |
Type | IKO Tanetech R-UV.Guidance for specification option: IKO tanetech R-UV is a solvent containing single-component resin based on aliphatic polyurethane. IKO tanetech R-UV cures through reaction with the air humidity. |
Reinforcement | IKO Glass Fleece 225. |
Colour | Dark grey. |
Basecoat | IKO tanetech R-EC. Guidance for specification option: IKO tanetech R-EC is a solvent containing single-component resin based on aromatic polyurethane. IKO tanetech R-EC cures through reaction with the air humidity. |
Density | +/- 1,4 g/cm³. |
Viscosity | +/- 9000 mPas. |
Hardness | +/- 30. |
TensileStrength | > 5 N/mm². |
Elongation | > 300%. |
Water vapour resistance | 3.939. |
Storage | 12 months in the hermetically sealed packaging, when stored in a dry, Guidance for specification option:
|
Third-party certification | ETA-13/0168 according to ETAG 005; BROOF(t1) & BROOF(t4) according to EN13501-5; Production ISO 9001 & 14001. |
Sustainability data
Material | Polyurethane (PUR) |
Literature
Brochure - IKO PLC (UK) ESG Report