Insulated Fire Rated Loft Hatch | Picture Frame - Access Panel

One-hour Fire Rated Loft Hatch with picture frame, manufactured in Zintec steel will fit into any one hour fire rated ceiling allowing you access to the loft space above.

Please note, this loft hatch must be installed into a vented Roof space to avoid condensation.

This specification of loft hatch is manufactured from Zintec steel with a 0.9 mm thick door and a 1.2 mm frame. The panels door leaf is hinged by a pin hinge. The panel is insulated with 100 mm thick Rockwool .

The panel is one hour fire rated for integrity up to 535 x745 mm in a ceiling application tested in accordance with B.S. 476: Part 22 :1987. The product achieves a U Value of 0.35 W/m2K.

This specification of loft hatch meets minimum requirement of FR-30 and FR-60 specification.

Bespoke sizes available upon request.

Features and benefits:

• 1 hour fire rated
• Meets all building regulations for insulation, air tightness, L1 & L2 and NHBC size requirements
• Thermally insulated with 100mm of high performance Rockwool providing 0.35W/m3K U-value
• 44DB Acoustic Rated
• Draught sealed
• Airtight
• Easy to install
• Minimalist look
• Can be painted over to match existing décor
• Spring loaded invisible keyhole
• 25mm picture frame covers rough areas in structural opening
• Pivot hinged
• Manufactured in the UK.
• Can be fixed into position by screwing through the side of the frame into a timber surround within the structural opening (to be cut 5 mm larger than panel size).
• Confirms to Parts L1 and L2 of the Building Regulations.

Please note: Trade Access Panels can make bespoke Fire Rated Loft Hatches (30 mins) FD30 Fire Rating up to a maximum size of 1200 x 900 mm (hinged on the 1200 mm side).