Intergard® 251
Verified by manufacturer 5 months ago
Two component epoxy anti-corrosive primer pigmented with zinc phosphate.
Application
For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp, paper and bridge industries. Not designed for continuous water immersion.
Description
The fast-drying and handling properties of Intergard 251 coupled with extended overcoatability make this an suitable primer for factory application prior to full system application on site. Intergard 251 is a two component anti-corrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
Features and benefits:
- Intergard 251 provides good abrasion resistance which minimizes mechanical damage in transit between the factory and site.
General information
Color | Buff Grey Red Guidance for specification option: Red oxide. |
Finish | Matt |
Material | Epoxy |
Uniclass | |
CAWS | G10/630 Galvanizing plus site-applied G10/635 Thermally sprayed zinc coating plus site-applied G10/638 Shop priming G10/640 Shop painting G10/643 Protective painting G10/65 Shop priming for G10/650 Site painting G10/660 Shop plus site painting G12/20 Shop priming G12/30 Proprietary G12/330 Proprietary metal members G12/650 Shop priming |
Specification data - Solvent-borne metal primers
Composition | Zinc phosphate. |
Product Reference | Intergard® 251 |
Wet film thickness (minimum) | 79–119 μm. Guidance for specification option: Microns wet. |
Dry film thickness | 50–75 μm. Guidance for specification option: Microns dry. |
Primer | None. Guidance for specification option: Intergard 251 is designed for application to correctly prepared steel. However, it is also possible to apply over approved prefabrication primers, Further details of these can be obtained from International Protective Coatings. Interzinc 22. Guidance for specification option: Mist coat or tie coat may be required. Interzinc 52. InterH2O 280. |
Top coat | Intercure 200HS. Intercure 420. Interfine 629HS. Interfine 878. Interfine 979. |