Interseal® 670HS
Verified by manufacturer 5 months ago
Low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.
Application
For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
Interseal 670HS is suitable for overcoating intact, aged alkyd, epoxy and polyurethane systems. However, this product is not recommended where thermoplastic coatings such as chlorinated rubbers and vinyl have previously been used. Consult International Protective Coatings for alternative recommendations. Interseal 670HS can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.
Description
A high solids, low VOC, two component, high build, surface tolerant epoxy coating, providing anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service.
Features and benefits:
- Provides anti-corrosive protection in industrial environments, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service.
- Available in an aluminium pigmented version to provide additional anti-corrosive barrier protection.
- Certified to NSF/ ANSI 61 (for tanks greater than 378.5 L).
General information
Color | Guidance for specification option: Wide range via the Chromascan system, consult manufacturer for options. |
Finish | Semi gloss Guidance for specification option: Aluminium is eggshell. |
Material | Epoxy Guidance for specification option: Surface tolerant epoxy. |
Uniclass | |
CAWS | G10/630 Galvanizing plus site-applied G10/635 Thermally sprayed zinc coating plus site-applied G10/638 Shop priming G10/640 Shop painting G10/643 Protective painting G10/65 Shop priming for G10/650 Site painting G10/660 Shop plus site painting G12/20 Shop priming G12/30 Proprietary G12/330 Proprietary metal members G12/650 Shop priming |
Specification data - Aluminium paints
Finish | Eggshell aluminium.Guidance for specification option: Semi-gloss. |
Execution | Applying coating system. |
Product Reference | Interseal® 670HS |
Wet film thickness (minimum) | 122–305 μm. Guidance for specification option: Microns wet. |
Dry film thickness | 100–250 μm. Guidance for specification option: Microns dry. |
Primer | None. Guidance for specification option: Interseal 670HS will normally be applied to correctly prepared steel substrates. Intercure 200. Intergard 269. Interplus 256. Interplus 356. |
Top coat | None. Intercryl 530. Interfine 629HS. Interfine 878. Interfine 979. |