NBS Source
I'm a manufacturer

Isover CLIMPIPE Section Alu2

Verified by manufacturer 7 days ago

Saint-Gobain Isover UK Third party certifications:
  • DoP

    DoP

    Certificate type

HVAC - Thermal insulation suitable for pipework.

Jump to:
+44 (0) 800 0322 555 Website

Application

  • HVAC - Pipework

Description

CLIMPIPE Sections can be considered for the thermal and acoustic insulation of pipework. Robust and lightweight, they feature pre-formed ‘snap on’ sections with a reinforced self-adhesive overlap to help ensure a strong vapour barrier. Manufactured in 1.2m lengths, they offer the opportunity for fewer joints than traditional 1m products, helping to reduce thermal bridging.


Product Features:

  • 1.2m length glass mineral wool pipe sections with an aluminium foil facing
  • Supplied in insulation thicknesses of 20-60mm with a range of inner diameters of 15-273mm
  • Manufactured from up to 70% recycled glass


Fire Classification:

Euroclass A2L-s1,d0 Reaction to Fire classification according to EN 13501-1.


Product Benefits:

  • Thermal Performance - The uniform density and concentric positioning of the bore hole offers energy savings by effectively controlling the thermal heat loss and gain along the length of the pipework.
  • Acoustic Performance - Due to the natural sound wave damping effect that glass mineral wool possesses, noise levels from waste water pipes services can be reduced with CLIMPIPE Sections.
  • Fire Classification - Euroclass A2L-s1,d0 Reaction to Fire classification, according to EN 13501-1.
  • Recycled Glass - Manufactured from up to 70% recycled glass.
  • Easy to Install - The 1.2m pipe sections are lightweight and easy to install with pre-formed snap on sections and a self-adhesive overlap for fast and efficient installation.


Key Considerations:

When using Isover CLIMPIPE Section Alu2, you need to satisfy yourself that use of the product meets all relevant national Building Regulations and guidance as well as local, national and other applicable standards relevant for your construction or application, including requirements in relation to fire.


Please refer to the following product documents:

  • Product Datasheet
  • Declaration of Performance
  • Safe Use Instruction Sheet

General information

Color

Silver

Yellow

Finish

Aluminium

Material

Glass mineral wool

Guidance for specification option:

Glass

Length

1200 mm

Uniclass

Pr_80_77_76_54 Mineral wool pipe section insulationPrimary

CAWS

S90/570 Insulation to pipework

S90/570 Insulation to pipelines

Specification data - Mineral wool pipe section insulation

Recycled content

Up to 70%.

Thermal conductivity

0.033–0.130 W/m.K (10–400°C.)

Guidance for specification option:

  • 0.033 W/m.K at 10°C.
  • 0.036 W/m.K at 50°C.
  • 0.043 W/m.K at 100°C.
  • 0.062 W/m.K at 200°C.
  • 0.092 W/m.K at 300°C.
  • 0.130 W/m.K at 400°C.
  • 0.179 W/m.K at 500°C.


Finish

Aluminium foil faced.

Reaction to fire classification

Euroclass A2L-s1,d0 Reaction to Fire classification according to EN 13501-1.

Insulation thickness (minimum)

20–60 mm.

Vapour barrier

-

Material

Aluminium.

Execution

Installing foil faced mineral wool insulation on pipelines.

Product Reference

ISOVER CLIMPIPE Section Alu2

Diameter

15–273 mm.

Guidance for specification option:

Outer diameter.

Service temperature

5–500°C.

Manufacturer guidance

Suitable for continuous service temperatures from 5°C to 500°C. The temperature on the aluminium facing should not exceed 80°C. When using the product for the insulation of pipework with a surface temperature below dew point, care must be taken to ensure a 100% vapour barrier is maintained.

Corrosion resistance

Can be considered to fulfill the demands in ASTM C795-08
(Standard Specification for Thermal Insulation for Use in
Contact with Austenitic Stainless Steel) section 13.

External

ISOVER CLIMPIPE Section Alu2 is suitable for external applications when used with an appropriate weatherproof jacketing system.

Handling

Manufacturer's standard.

Manufacturer guidance

Information regarding storage, installation and handling of ISOVER products, or health and safety information, can be found on the manufacturer's website.

Compliance with Building Regulations Part H

-

Manufacturer guidance

Compliance with the following:


  • England, Wales and Scotland: BS 5422: 2009 or TIMSA Guidance for Achieving Compliance with Part L of the Building regulations.
  • For Scotland, also refer to Technical Handbooks; Domestic Handbook 2010 and Non-Domestic Handbook 2010 Sections 6 - Energy.

Third party product certification

ISO 14001; ISO 9001.

Guidance for specification option:

Environmental:


  • Manufactured under Environmental Management System - ISO 14001.
  • Zero ODP (Ozone Depletion Potential); GWP <5 (Global Warming Potential).


Quality:


  • Manufactured under Quality Management System - ISO 9001.


Sustainability data

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

70 %

Manufacturer guidance

ISOVER CLIMPIPE Section Alu2 is manufactured from up to 70% recycled glass

Third party certifications

DoP

Declaration of Performance (DoP) : Isover Climpipe Section Alu2