JORDAHL® Punching Shear Reinforcement JDA
Verified by manufacturer 3 months ago
EPD
Certificate type
European Technical Approval (ETA)
Certificate type
UK Technical Assessment (UKTA)
Certificate type
LEED US
Certificate type
Double-headed shear rail reinforcement system to distribute punching shear forces in concrete floor slabs
Application
JDA shear rail units replace the need for drop beams or closely spaced traditional link reinforcement in floor slabs that are subject to punching shear loads. This reduces cost and reinforcement congestion.
Installed into the concrete from above, the stud rail units are positioned in floor slabs and foundation slabs to distribute punching shear loads above column or pile locations.
Typical Applications:
- Flat slab concrete construction.
- Precast filigree slabs.
Description
Double-headed stud reinforcement anchors are factory-welded to carrier rails. They are typically supplied in two to five anchor configurations.
Features and benefits:
- High load transfer.
- Reduces reinforcement congestion.
- Enables flat slabs without thickening at columns or the need for drop beams.
- European Technical Assessment - ETA-13/0136.
General information
Color | Black |
Finish | Mill |
Material | Steel |
Shape | Other |
Uniclass | |
CAWS | E30/240 Proprietary prefabricated reinforcement |
Product range |
Specification data - Prefabricated reinforcement
Application | Shear heads. |
Diameter | 10–30 mm head diameter.Guidance for specification option: 34.1 kN load bearing capacity. 12–36 mm head diameter.Guidance for specification option: 49.2 kN load bearing capacity. 14–42 mm head diameter.Guidance for specification option: 66.9 kN load bearing capacity. 16–48 mm head diameter.Guidance for specification option: 87.4 kN load bearing capacity. 20–60 mm head diameter.Guidance for specification option: 136.6 kN load bearing capacity. 25–75 mm head diameter.Guidance for specification option: 213.4 kN load bearing capacity. |
Third party certification | European Technical Assessment - ETA-13/0136. |
Number | Guidance for specification option: Insert requirement. |
Anchor length | 125–695 mm. Guidance for specification option: Insert requirement, available 125–695 mm dependent on anchor diameter. |
Anchor spacing | Guidance for specification option: Insert requirement. |
Strip length | 200–665 mm. Guidance for specification option: Insert requirement, available 200–665 mm dependent on anchor diameter and length. |
Materials | Steel. Guidance for specification option:
|
Sustainability data
Country of product manufacture | Germany |
Material | Steel |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | Manufacturer guidanceRefer to EPD document |
Recyclability | Manufacturer guidanceRefer to EPD document |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | Manufacturer guidanceRefer to EPD document |
Third party certifications
Third party certifications
EPD
EPD-Jordahl Punching Shear Reinforcement JDA
European Technical Approval (ETA)
European Technical Assessment for JORDAHL PUNCHING SHEAR REINFORCEMENT - JDA - ETA-13/0136
UK Technical Assessment (UKTA)
UK Technical Assessment - Punching Shear Reinforcement JDA
LEED US
LEED Assessment Jordahl Punching Shear Reinforcement JDA
Literature
Jordahl Punching Shear Reinforcement JDA
Installation Instructions Jordahl Punching Shear Reinforcement JDA