NBS Source
I'm a manufacturer
Compare variants

Klargester AquaOil Bypass MDPE & Full Retention GRP Separator - Fuel and Oil Separator

Verified by manufacturer over a year ago

NSBE010

Kingspan Klargester Variant:

A bypass separator for projects where it is considered an acceptable risk to not provide full treatment for very high flows.

Jump to:
+44(0) 1296 633 033 Website

Application

  • Garage forecourts
  • Car parks
  • Workshops
  • Supermarkets/shopping centres
  • Distribution warehouses
  • Car wash bays
  • Scrap yards
  • Car garages
  • Fuel storage sites
  • Distribution/haulage centres
  • Waste transfer sites
  • Business/commercial parks/industrial estates

Description

Kingspan Klargester bypass separators have been designed for use in projects where it is considered an acceptable risk to not provide full treatment for very high flows, such as, where the risk of a large spillage and heavy rainfall occurs at the same time is small.


Bypass separators fully treat all flows generated by rainfall rates of up to 6.5 mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator.


Typical bypass interceptor applications include surface car parks, roadways and lightly contaminated commercial areas.


Features and benefits:

  • Engineered to achieve a concentration of less than 5 mg per litre.
  • Treats the ‘first flush’, which is approximately 10% of the peak flow.
  • Can be maintained from ground level.
  • Light and easy to install, saving you time and money.
  • Affordable service and maintenance plans are available.
  • GRP or rotomoulded construction (subject to model).
  • Inclusive of silt storage volume.
  • Fitted inlet/outlet connectors and vent points within necks.
  • Extension access shafts for deep inverts.
  • CE-marked.
  • SmartServ Pro remote monitoring solution available for added peace of mind.

General information

Color

Cream

Material

Medium density polyethylene (MDPE)

Glass Reinforced Plastic (GRP)

Shape

Other

Length

1700 mm

2072 mm

2950 mm

3896 mm

3576 mm

Show more

Width

1350 mm

1220 mm

1420 mm

1920 mm

Warranty description

Three year

Guidance for specification option:

Three year warranty when registered online and must be serviced by a Kingspan engineer or accredited service partner. Other terms and conditions apply, consult manufacturer.

Uniclass

Pr_65_55_76_58 Oil and petrol separatorsPrimary

CAWS

R12/421 Oil and petrol separator units – plastics

Specification data - Oil and petrol separators

Standard

To BS EN 858-1.

Certification

CE marked.

Separator type

Bypass.

Class

To BS EN 858-1 Class l.

Nominal size

NS 100.

Connections

-

Inlet

315 mm diameter.

Outlet

315 mm diameter.

Vent pipes

-

Manufacturer guidance

Within necks.

Integral accessories

Fitted inlet/outlet connectors and vent points within necks.

Accessories

Not required.

SmartServ Pro remote monitoring solution.

Guidance for specification option:

Optional extra.

Capacity

Silt: 1000 L; Oil: 150 L.

Literature

Klargester Aquacore Sustainable Drainage Systems Brochure

Klargester Aquacore Sustainable Drainage Systems Brochure

NSBE 010-125 Class 1 Bypass Separators

NSBE 010-125 Class 1 Bypass Separators

DS0560P-02 - Separator Bypass Flow Route

DS0560P-02 - Separator Bypass Flow Route

DS0561P-01 - Separator Normal Flow Route

DS0561P-01 - Separator Normal Flow Route

DS0561P-02 - Separator Normal Flow Route

DS0561P-02 - Separator Normal Flow Route

DS0848P-04 NSFA010-015 Full Retention Separators

DS0848P-04 NSFA010-015 Full Retention Separators

DS0896P-04 NSFA080-285 Full Retention Separators

DS0896P-04 NSFA080-285 Full Retention Separators

Similar products from Kingspan Klargester

Klargester AquaOil Forecourt Separator  - Fuel and Oil Separator

Klargester AquaOil Forecourt Separator - Fuel and Oil Separator

Klargester AquaOil Full Retention MDPE & Full retention GRP Separator  - Fuel and Oil Separator

Klargester AquaOil Full Retention MDPE & Full retention GRP Separator - Fuel and Oil Separator