Verified by manufacturer 5 days ago
Composite decking with integral textured strips.
Use Millboard decking for all standard outdoor flooring applications (e.g. in residential, commercial, education, healthcare, leisure and hospitality) including:
Millboard can be used as the decorative face for most outdoor designs, as long as it is fixed to a structural element.
Installation:
For all applications Millboard decking boards to be installed with a 4 mm gap between the boards and a 1 mm gap at butt ends, to facilitate drainage. There is no need for a ventilation gap to be left under Millboard decking boards. The maximum unsupported overhang for the boards is 50 mm, each cut board must be supported by a minimum of three joists. Each board must be screwed down with 2 x Millboard Durafix® stainless steel screw fixings where a board crosses a joist, and 3 x Millboard Durafix® stainless steel screw fixings at the ends of the boards.
Ground level application (soft surface):
Millboard decking boards installed over DuoSpan 99 mm Joists and Beams, Beams supported by Plas-Pro Posts concreted into the ground. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.
Hard surfaces application (roof terrace, concrete base):
Millboard decking boards installed over DuoSpan Joists, Joists supported by DuoLift joists supports onto a solid/stable base. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.
Joist spacing:
The Lasta-Grip boards need to be supported at 400 mm centres for residential applications, for commercial applications, bridges, balconies and steps this needs to be reduced to 300 mm centres.
Our Lasta-Grip® collection combines the attractive appearance of our Enhanced Grain boards with a unique textured design that offers outstanding slip-resistance, without the rough feel of conventional gritted strip boards. Perfect for commercial areas where safety is paramount, but appearance is important.
The structural core of Millboard decking is a blend of natural minerals bonded in a polymer resin, with long fibre reinforcement for mechanical strength and durability. The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.
Features and benefits:
Color | Brown Guidance for specification option: Coppered Oak Gold Guidance for specification option: Golden Oak |
Finish | Guidance for specification option: Moulded from hand selected prime oak masters with integrated grip strips. |
Material | Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished. |
Shape | Rectangle |
Length | 3600 mm |
Width | 200 mm |
Height | 32 mm |
Warranty description | 25 year Guidance for specification option: 25 Year Limited Structural Decking Warranty (Residential Only) Ten year Guidance for specification option: 10 Year Limited Structural Decking Warranty (anything other than residential) |
Material | Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished. |
Uniclass | |
CAWS | Q55/110 Deck Q55/380 Deck boards |
Finished size | |
Section | 200 x 32 mm. |
Length | 3600 mm. |
Colour | Coppered Oak. Golden Oak. |
Fixings | Millboard Durafix® stainless steel T15 decking screws 4.5 x 60 mm. Millboard Durafix® stainless steel T15 decking screws 4.5 x 45 mm. Millboard Durafix® stainless steel T15 fascia screws 4.5 x 35 mm. |
Sub frame | DuoSpan 51 mm Joist. DuoSpan 99 mm Joist. Plas-Pro 50 x 50 mm Joist. Plas-Pro 125 x 50 mm Joist. |
Joist supports | DuoLift 15-60 mm Joist Cradle. DuoLift 20 mm Self-Levelling Joint. DuoLift 45 mm Riser. DuoLift 45 mm Foot. DuoLift Acoustic Separation Pad. |
Edge | Square. |
Slip resistance | To BS 7976-2:2002+A1:2003 using slider 96, 43-63 (Wet) 58-75 (Dry). |
Reaction to fire | To EN 13501-1:2007 + A1:2009, Bfl - s1. |
Resistance | To BS EN 438-2:2005. Guidance for specification option: Staining, no visible change. |
Resistance to static indentation (reinforced) | MOAT 27:1983, 0.1 mm. |
Soft body | MOAT 43:1987, 0 mm. |
Hard body | MOAT 43:1987, 0 mm. |
Impact resistance after UV aging - 1000 h - 10 mm | To BS EN 13245-1, 2010. Guidance for specification option: No cracking or damage to topcoat. |
Abrasion resistance | To BS EN ISO 7784-2:2006, 261 mg. |
ThermalConductivity | 0.084 W/mK. Guidance for specification option: When tested with FOX 200 heat flow meter. |
Spacing | 400 mm centres. 300 mm centres. Manufacturer guidanceThe Lasta-Grip boards need to be supported at 400 mm centres for residential applications, for commercial applications, bridges, balconies and steps this needs to be reduced to 300 mm centres. |
Spacing | 4 mm gap between boards, 1 mm gap at the ends of the boards. Manufacturer guidanceBoard. |
Surface finish | Moulded from hand selected prime oak samples with integral textured strips. |
Top layer | Lastane® layer. Guidance for specification option: The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage. |
Accessories | Flexible Bullnose edging. Square edging. Bullnose Board. Fascia. |
Country of material origin | United Kingdom Guidance for specification option: Material origin varies however is within UK and Europe. |
Country of product manufacture | United Kingdom |
Material | Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished. |
Manufacturing plant location | The Old Post Office, St Nicholas' St, Newcastle upon Tyne NE1 1RH, UK |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 39 kg CO₂ eq/unit |
Recyclability | Guidance for specification option: Not currently recycled but upcycled and used as path edging, planters, seating and other outdoor creations. Municipal incineration of Millboard provides effective energy recovery. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 38 % Guidance for specification option: Over a third of the raw materials used for making the structural core of Millboard is recycled. |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
![]() | - | 3 |
![]() | - | 5 |