NBS Source
I'm a manufacturer

Application

Suitable for use in basements, balconies and wet rooms.

Description

Waterproof render system, consisting of the following components:


Hydro Osmo K:

A single-component, waterproofing, polymer-modified cementitious mortar made of high-strength hydraulic binders, selected aggregates, special additives and adhesion promoters. When mixed with water, creates a continuous waterproof coating with excellent breathability and resistance to abrasion and freeze-thaw cycles.


Features and benefits:

  • Specifically for the protection of concrete.
  • Excellent resistance to direct and indirect hydrostatic thrust which is essential for a good waterproofing coating, thus allowing it to combat the penetration of water under both positive and negative pressure.
  • High binding power.
  • High water vapour permeability.
  • Excellent resistance to freeze-thaw cycles.
  • Excellent abrasion resistance, high-performance hydraulic binders, selected inert materials in a continuous grading curve result in good superficial mechanical strength.


Application:

Apply Hydro Osmo K with a brush or float, within 30–40 minutes of mixing. After about 4–6 hours (depending on the weather conditions), apply a second coat. The thickness of each layer of Hydro Osmo K should not exceed 1.5 mm; the final thickness should be between 3 and 4 mm. Application by spraying can be done easily with plastering machines (continuous cycle machines must not be used). The mixing water must always be dosed correctly, even using simple graduated buckets


Raso Top 800:

A fibre-reinforced mineral adhesive/skim coating made with hydraulic binders, polymer-modified resins, selected inert materials and latest-generation additives. Specifically devised for bonding and skim coating thermal insulation panels.


Features and benefits:

  • High adhesion: owing to the addition of specific additives.
  • Boasts excellent adhesion to the majority of commonly used substrates.
  • Can also be used as a "regulating" product on extra thick surfaces that are not flat (up to 10 mm).
  • Easy workability.
  • ETA certified.
  • Outstanding wetting and thixotropic properties.
  • Controlled hygrometric shrinkage.


Finish Pro 280:

A polymer-modified smoothing mortar, with a fine civil texture, based on hydraulic binders, selected pure aggregates and specific additives. Formulated in the Licata S.p.A. research and development laboratories, it is characterised by easy workability, thixotropy and wetting power. The presence of re-dispersible resins gives the product an increase in the power of adhesion and resistance to aggressive agents present in the atmosphere.


Features and benefits:

  • Certified according to UNI EN 1504-2.
  • Easy workability.
  • Excellent thixotropy.
  • Fibre-reinforced.
  • High adhesion power.
  • Controlled hygrometric withdrawal.

General information

Color

Grey

Finish

Smooth

Natural

Manufacturer guidance

Finish Pro 280. Cementitious mortar, polymer-modified, thixotropic, fiber-reinforced, certified according to UNI EN 1504-2, specific for smoothing and protecting concrete.

Material

Silicone

Cement

Manufacturer guidance

Finish Pro280, Hydro Osmo K, Raso Top 800.

Shape

Rectangle

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

Uniclass

Ss_25_45_70_55 Multicoat render systemsPrimary

CAWS

M20/19 Proprietary cement gauged render

M20/160 Proprietary cement gauged render

Product range

Licata Waterproofing System

Specification data - Multicoat render systems

System performance

Waterproofing.

Standard

UNI EN 1504-2.

Substrate preparation

Hydro Osmo K.

Lathing

Licatatherm 160 mesh in vertical strips, overlapping it along the side edges for at least 100 mm.

First undercoat

Hydro Osmo K.

Second undercoat

Raso Top 800.

Final coat

Finish Pro 280.

Beads

Licata meshed corner beads.

Sealant movement joints

-

Beads

PVC Movement Bead.

Fixings

Adhesively fixed.

Sealant

Compression band.

Samples required

Product samples.

Execution

Preparation of reinforcement.

System completion

Testing of completed repair or renovation system.

Sustainability data

Contains Red List materials

No

Country of material origin

Italy

Country of product manufacture

Italy

Similar products from Licata Building Systems Ltd

Licata Anti-crack Render System

Licata Anti-crack Render System

Licata Monocouche Render System - One Coat Render System

Licata Monocouche Render System - One Coat Render System

Licata Silicone Render System Self Cleaning

Licata Silicone Render System Self Cleaning