Verified by manufacturer 6 months ago
Part of a range of fine-textured loadbearing units, suitable for facing and general purpose applications.
For walls that are to be directly decorated, Paint Grade blocks should be specified.
For walls built fair, Fair Face blocks should be specified.
Walls of 210–215 mm thickness are recommended to be constructed using two leaves of 100 mm Lignacite blocks laid back-to-back and suitably tied. This construction is known as a collar-jointed wall.
Can be used in the following locations:
The blocks can accommodate drylining, dense plaster, finishing coats and external rendering. Consult manufacturer for further finish recommendations.
Lignacite concrete blocks are fine textured and available with a paint grade or fair face finish. Manufactured to BS EN 771-3, Lignacite blocks are robust and durable with a technical performance that makes them well-suited to most applications.
The blocks’ unique mix design (consisting of cement, fine aggregates and recycled graded-wood particles) accounts for their outstanding technical performance.
This 140 mm-wide version, known as Lignacite SP, has a specially formulated mix that optimizes the block density to produce a solid block with a unit weight of less than 20 kg. There is a slight colour difference between Lignacite SP and 100 mm Lignacite blocks.
Features and benefits:
Mortar:
Generally, the mortar type for work above ground level should be designation (iii) / Compressive Class M4. Stronger mixes may be required if blocks are used below ground.
Movement:
Vertical movement joints should be considered in accordance with masonry design codes and the recommendations of Published Document PD 6697, at 6.0-8.0 metre spacings. In areas of raised stress, such as above and below openings in external walls, the blockwork may need to be reinforced to restrain movement.
Design:
The design of walls using Lignacite blocks should be in accordance with relevant design standards, including BS 8103: Part 2, BS EN 1996-1-1 and the requirements of the Building Regulations.
Color | Grey |
Finish | Textured |
Material | Concrete Aggregate Manufacturer guidanceMedium density aggregate concrete. |
Shape | Rectangle |
Length | 440 mm |
Width | 140 mm |
Height | 215 mm |
Uniclass | |
CAWS | E60/297 Proprietary infill blocks F10/18 Concrete facing blockwork F10/355 Concrete common blockwork |
Product range |
Standard | To BS EN 771-3. |
Block description | Common block (standard).Guidance for specification option: For locations where the surface will not be visible e.g. for plastering or use below ground. Fair-faced block.Guidance for specification option: For locations requiring a consistent colour and close textured block face. Paint-grade block.Guidance for specification option: For locations where a consistent close textured face is required as a background for direct painting. Manufacturer guidanceFine textured, loadbearing units for facing and general purpose applications. |
Appearance | Medium grey in colour with a fine textured surface. |
Configuration | Group 1.Guidance for specification option: Please note there is a slight colour difference between the traditional block and the Lignacite SP. |
Compressive strength | |
Mean value | 3.6 N/mm². |
Category | I. |
Thermal conductivity | 0.79 W/m·K at 3% moisture content.Guidance for specification option: Internal use. |
Thermal resistance | 0.177 m²K/W at 3% moisture content. |
Work sizes (length x width x height) | 440 x 140 x 215 mm. |
Tolerance category | D1. |
Density | |
Net dry density | 1450 kg/m³.Guidance for specification option: SP. |
Reaction to fire | Class A1. |
Water absorption by capillarity | 5/15 µ. |
Moisture movement | <0.7 mm/m. |
Weighted sound reduction index, Rw | No finish: 49 dB; paint finish: 50 dB. |
Fire resistance | Non-loadbearing wall (criteria E1): 4 hours; loadbearing wall (criteria RE1): 3 hours. Guidance for specification option: See manufacturer's literature for further examples. |
Third-party certification | BSI Kitemark approved KM 09694. |
Air tightness | No finish: 4.62 m³/h/m²; paint finish (one side): 0.25 m³/h/m². |
Unit weight | 19.2 kg. Guidance for specification option: Laid weight including mortar: 206 kg/m². |
Recyclability | 100% |
Ash GP 100 mm 10.4 N Concrete Blocks
Ash GP 100 mm 10.4 N Coursing Blocks
Ash GP 100 mm 3.6 N Concrete Blocks
Ash GP 100 mm 7.3 N Concrete Blocks
Ash GP 100 mm 7.3 N Coursing Blocks
Ash GP 140 mm 10.4 N Concrete Blocks
Ash GP 140 mm 10.4 N Coursing Blocks
Ash GP 140 mm 3.6 N Concrete Blocks
Ash GP 140 mm 7.3 N Concrete Blocks
Ash GP 140 mm 7.3 N Coursing Blocks