Compare

M2000 Flow Measurement Device

Name: M2000 Flow Measurement Device
Brand: Hattersley
SKU: vEq3VVsDfyJkQLgyEv2JZ9

Verified by manufacturer 2 months ago

DN50

Stainless steel metering station.

Jump to:

Application

Stainless steel metering station.

Features and benefits:

Compact, wafer design for fitting in tight spaces.
Accurate flow measurement.
Supplied with red and blue test points for upstream and downstream port identification.
Accuracy of flow measurement at normal velocities is ±5%.
WRAS Approved for drinking water applications in sizes DN65 to DN150.
Outside diameter locates metering station centrally on the relevant BS EN 1092-2 PN16 flange bolting.
Compatibility with other flanges available.
Use with Figure MH733 to make Commissioning Set MH2733.
Flow charts available.

Color	Yellow Guidance for specification option: Test point. Silver Guidance for specification option: Orifice plate and extension sleeve. Red Guidance for specification option: Upstream test point marker. Blue Guidance for specification option: Downstream test point marker.
Material	Stainless steel

Uniclass	Pr_65_54_95_30 Flow-measuring valvesPrimary
CAWS	S14/490 Water metering valves

General requirements	Test points.
Standard	To BS 7350: 1990.
Arrangement	1.
Material	Stainless steel grade 316L to BS EN X2 CrNiNo17-12-2 and ASTM A276-316L.
Connections	Orifice plate fitted between relevant BS EN 1092-2 PN16 flange bolting. Guidance for specification option: Outside diameter locates metering station centrally on the relevant BS EN 1092-2 PN16 flange bolting. Compatibility with other flanges available.
Accessories	Not required. Flow charts. Guidance for specification option: Available on request.

Third party certification:	WRAS Approved. Guidance for specification option: For drinking water applications in sized DN65 to DN150.
PressureRange	Temperature: -10 to +120°C: 16 bar. Guidance for specification option: PN16. The Test Point Figure 631 has a maximum working temperature of 120ºC. For higher temperature requirements, contact manufacturer. Manufacturer guidance Test pressures: Shell (24 bar).
Inlets/outlets diameter	DN50.
Dimensions	20 x 119 x 109 x 53.1 mm. Guidance for specification option: Tapping position angle 90°. Manufacturer guidance Nominal A x B x C x D.
Weight	1.4 kg.
Integral accessories	Figure 631 test points and extensions. Guidance for specification option: Supplied fitted with two Fig. 631 test points (red and blue). Extensions supplied standard.