Mapefloor Comfort System AR/X
Verified by manufacturer over a year ago
Self-levelling, elastic, smooth, coloured, aromatic, polyurethane resin-based coating system equipped with a flexible elastic mat.
Application
Suitable for coating floors in internal civil environments and in the service sector, such as:
- Hospitals.
- Museums.
- Bars.
- Shops.
- Schools and nurseries.
- Apartments.
Not suitable for constant exposure to high temperatures and thermal shock.
Description
Self-levelling, elastic, smooth, coloured, aromatic, polyurethane resin-based coating system equipped with a flexible elastic mat made from rubber granules. The system has a total thickness of 6 mm.
Features and benefits:
- UV resistant.
- Attractive finish.
- Flexible.
- Easy to apply.
- Very low emission level of VOC.
- Reduces noise levels.
- Soft and comfortable underfoot.
- Helps to create seamless floors with no distribution joints.
- A variety of colours are available.
- Easy to maintain and clean.
- Reduces the force of impact on the ground.
- Resistant to chemical products commonly used to clean and maintain floors.
Components (in order of application):
- Mapefloor Pore Filler – coated onto the substrate; used as an adhesive for the rubber matting.
- Mapecomfort – rubber mat.
- Mapefloor PU 460.
- Mapefloor Finish 59 W – coloured finish which gives the surface a matt effect.
Consult manufacturer's literature for information on recommended substrate preparation, mixing instructions and conditions not suitable for the application of this product.
General information
Color | Clear |
Finish | Matt |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Specification data - Floor surface coating resins
Resin | |
Colour | Manufacturer guidanceConsult manufacturer and insert RAL colour requirement. |
Sheen | Matt. |
Product Reference | Mapefloor Comfort System AR/X |
Consumption (per layer applied) | Adhesive for rubber mat: Mapefloor Pore Filler: 0.4–0.8 kg/m². Skim coat/ pore filler: Mapefloor Pore Filler: 0.4–0.5 kg/m². Self-levelling coating: Mapefloor PU 460: 2.5 kg/m² (per 2 mm thick coat). Finishing coat: Mapefloor Finish 58 W: 0.1–0.2 kg/m² (per coat). |
Thickness | Overall coating: 6 mm. Mapecomfort rubber mat: 4 mm. |
Drying time | Ready for foot traffic: After 12 hours. Completely hardened: After 7 days. Manufacturer guidanceHardening and step-on time (at 20°C). |
Abrasion resistance | Taber test, to EN ISO 5470-1, 30 mg. Manufacturer guidance(after 7 days at 23°C). |
Impact sound reduction | EN ISO 10140, 16 dB. Manufacturer guidance(after 7 days at 23°C). |
Elongation at break | To DIN 53504, Mapefloor PU 460 component, 150%. Manufacturer guidance(after 7 days at 23°C). |
TensileStrength | To DIN 53504, Mapefloor PU 460 component, 7 N/mm². Manufacturer guidance(after 7 days at 23°C). |
Shore A hardness | To DIN 53505 Mapefloor PU 460 component, 75. Manufacturer guidance(after 7 days at 23°C). |
Resistance to tearing | To DIN 53515, Mapefloor PU 460 component, 18 N/mm². Manufacturer guidance(after 7 days at 23°C). |