Compare

MARISEAL® 400 - Aliphatic Polyurethane Top Coat

Name: MARISEAL® 400 - Aliphatic Polyurethane Top Coat
Brand: MARIS POLYMERS S.M.S.A
SKU: gYatFX2f4GcJb93YV9CNZY

Verified by manufacturer 11 months ago

MARIS POLYMERS S.M.S.A

Third party certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
European Technical Approval (ETA)
Certificate type

Pigmented, colour and UV stable, highly-permanent elastic polyurethane coating, used as a top coat for protection over exposed polyurethane waterproofing membranes.

Jump to:

+30 22620 32918-9 Website

Application

Top coat for use on:

Waterproofing of roofs;
Waterproofing of balconies, terraces and verandas.
Protection of polyurethane foam insulation;
Compatible with decorative floor flakes;
Compatible with silica sand.

Can be used over MARISEAL® 250, 250 FLASH, 260 etc. on surfaces with light pedestrian traffic (e.g. roofs/ terraces/ balconies etc.) that require a glossy, colour-stable and non-chalking finish.

Description

Pigmented, colour and UV stable, highly-permanent elastic polyurethane coating, used as a top coat for protection over exposed polyurethane waterproofing membranes.

Features and benefits:

One component.
Cures by reaction with ground and air moisture over aa exclusive moisture-triggered chemical reaction.
Protects very efficiently, especially if a dark final colour is required.
Simple application (roller or airless spray).
Increases the abrasion and wear resistance of the waterproofing membrane underneath.
Provides high solar reflectance (white colour) contributing to thermal insulation.
EPD verified.
Gives a glossy and easy-to-clean surface.
No chalking effect.
Resistant to stagnating water, heat and frost.
Maintains its mechanical properties over a temperature span of -40 to +90°C.
The waterproofed surface can be walked on (light pedestrian traffic).

General information

Color	White Grey Guidance for specification option: Light grey. Red Other Guidance for specification option: Bespoke.
Finish	Gloss
Material	Polyurethane (PUR) Guidance for specification option: Solvent based. Solvent-based
Shape	Formless

Uniclass	Pr_35_31_77_92 Ultraviolet (UV)-resistant sealersPrimary Pr_35_31_68_64 Polyurethane (PUR) waterproof coatings
CAWS	J31/47 Waterproof coating J31/353 Waterproof coating

Specification data - Ultraviolet (UV)-resistant sealers

Category	As recommended by liquid-applied coating manufacturer.
Colour	White. Light grey Red. Other. Guidance for specification option: Consult manufacturer for options and insert requirements.

Coverage	0.12–0.25 kg/m² in one or two layers. Guidance for specification option: Based on practical application by roller onto a smooth surface in optimum conditions.
Elongation at break	To ASTM D412, 180%.
Tensile strength	To ASTM D412, >20 N/mm².
Shore A hardness	To ASTN D2240 (15"), 85–90.
SolarReflectance	Solar reflectance, to ASTM E903-12, 85 (white only).
Service temperature	-40 to +90°C.
Final curing time	Seven days (at 20°C, 50% relative humidity).
Performance characteristics	Resistance to water pressure, to DIN EN 1928: No leak. Gloss retention after 2000 h of accelerated aging, to DIN 67530: Good. Gloss chalking after 2000 h of accelerated aging, to DIN EN ISO 4628-6: No chalking observed; chalking grade 0. Infrared emittance, to ASTM C1371-04a: 0.89 (white only). Solar reflectance index (SRI), to ASTM E1980-01, 107 (white only). UV accelerated aging in the presence of moisture, to EOTA TR-010: Passed. Hydrolysis (5% KOH, seven day cycle): No significant elastomeric change. Tack free time: 1–3 hours. Light pedestrian traffic time: 12 hours. Chemical properties: Good resistance against acidic and alkali solutions (5%), detergents, seawater and oils. Guidance for specification option: Time results based on conditions of 20°C and 50% relative humidity (RH).