Compare

Mini Instantaneous Water Heater (Premium)

Name: Mini Instantaneous Water Heater (Premium)
Brand: Stiebel Eltron UK Ltd
SKU: am71MaS2PnKZwzxThUarFU

Verified by manufacturer 14 days ago

DEM 4 - 236462

Third party certifications:

Mini instantaneous water heater, available rated either 3.8, 4.8 or 6.2 kW.

Jump to:

Application

Can supply direct hot water to one washbasin. Can be operated with pressure taps or non-pressurised taps.

Suitable for pre-heated water from solar thermal and heat pump systems.

Mini instantaneous water heater, available rated either 3.8, 4.8 or 6.2 kW.

Features and benefits:

Accurate temperature delivery up to the maximum output.
Special aerator for good flow pattern.
Internal permanent set temperature for childproofing and anti-scalding protection.
Supplies one hand washbasin at maximum efficiency due to electronic closed-loop control.
Instant hot water due to rapid and maintenance-free bare wire heating system.
At inlet temperatures >20°C, the unit is also suitable for showers.
Suitable for over sink and under sink installation with a single appliance.
Quick installation with PROFI-RAPID.
Includes safety system with high pressure switch and electronic temperature monitoring.
The outlet temperature sensor and control electronics ensure that the set temperature is achieved to the exact degree. For this, only the amount of energy required is expended; there is no need to add cold water at the tap.
Fast water connection.
Includes fault analysis with LED diagnostic traffic light.
Suitable for hard and soft water.
ErP rating: Class A.

Color	White
Shape	Rectangle
Length	82 mm Manufacturer guidance Depth.
Width	190 mm
Height	143 mm
Warranty description	Two year

Uniclass	Pr_60_60_96_27 Electric instantaneous water heatersPrimary
CAWS	S90/360 Instantaneous water heaters, electric

Third-party certification	Kiwa UK Water Regulation 4 approval (KUKreg4).
Arrangement	Single point – mains supply.
Rating	4.8 kW.
Flow rate	1.8 L/min. Guidance for specification option: Increase in water temperature of 28°C: 2.5 L/min.
Outlets	Single point.
Casing finish	White.
Accessories	- Manufacturer guidance Consult manufacturer and insert requirements; tap sets are available.

RatedCurrent	20.0 A.
Fuse rating	20 A. Manufacturer guidance Fuse protection.
Fluid temperature range	30–50°C.
Electrical connection	Single phase (240 V).
Frequency	50/60 Hz.
Ingress protection (IP) rating	IP25.
Unit weight	1.70 kg.