Model R
Verified by manufacturer 7 months ago
138 200 002
138 200 002
Wall Mounted Cycle holder.
Application
Suitable for use as a bicycle holder.
Description
The simplest cycle holder, a familiar sight throughout the UK, allows the tyre of the bicycle to be supported.
Features and benefits:
- The stand is fixed to a suitable wall and can be spaced at no less than 610 mm between holders for cost effective cycle parking.
- The Model R is available in either 90° or 45° versions which allow for cycles to be parked either head-on or angled.
- The practical and durable nature of the AUTOPA Model R cycle holder ensures it has been consistently specified and used since it’s introduction in the 1950’s.
- Galvanized steel tube.
Installation:
- Must be fixed to a suitable brick or concrete wall.
- Centre of holders should be approximately 345 mm (197 mm to centre of lower fixing hole) above ground level.
General information
Finish | Galvanized |
Material | Steel |
Length | 212 mm Guidance for specification option: Depth |
Width | 90 mm |
Height | 346 mm |
Warranty description | One year Guidance for specification option: This product is guaranteed for 12 months (if installed and used correctly). |
Uniclass | |
CAWS | Q50/32 Cycle stands Q50/210 Cycle stands |
Product range |
Specification data - Carbon steel cycle stands
Stand type | Cycle. |
Base | Bolt down. |
Finish as delivered | Galvanized. |
Weight | 1.9 kg. |
Angle | 45°. |
Accessories | Not required. 138 200 047 - M10 Raw bolt (2 required per cycle holder). |
Standards | To ISO 9001, ISO 14001 and OHSAS 18001. |
Sustainability data
Country of product manufacture | United Kingdom |