NBS Source
I'm a manufacturer

myenergi - eddi - Solar Energy Diverter

Verified by manufacturer 2 months ago

myenergi ltd

Microgeneration energy diverter.

Jump to:
+44 (0)333 300 1303 Website

Application

Use your power. Your way. eddi is designed to help you maximise the consumption of your self-generated solar / wind power. A solar photovoltaic (PV) system without an eddi is a like a car without a steering wheel or driver. Without an eddi, you have no control over where you want your self-generated energy to go, or how you want to use it.

Description

eddi is an eco-smart energy management system. It diverts surplus power from solar PV or wind generation to a designated heating appliance such as an immersion heater, under-floor heating and even Air-Source Heat Pumps. This excess energy will go directly to the appliance (or two sequentially). eddi allows you to stop exporting surplus energy back to the grid and saves you money on your energy bill. Specifying can also help towards improved SAP scores for properties, lowering DPER/DER.


Technical characteristics:

  • Cooling: Rear-mounted passive-cooled heatsink.
  • PWM resolution: 0.1%.
  • Measurement accuracy: ±1%.
  • Power conversion efficiency: 97.5% (typical).
  • Generator size supported: No limit (subject to 100 A per-phase grid supply).
  • Economy tariff sense input: 230 V a.c. sensing (2.5 kV isolated).


Features and benefits:

  • 3.68 kW/ 16 A maximum heater load.
  • Supports two heaters (sequentially).
  • Expansion module option - two extra outputs with temperature control.
  • Wall mounting bracket for ease of installation.
  • Integral bypass switch.
  • Overload and short-circuit protection.
  • Graphical back-lit LCD screen for ease of use.
  • Ethernet port and built-in WiFi for connecting to the internet.
  • Fan-less cooling.
  • Complies with CE and UKCA requirements.
  • Built-in programmable boost timers.
  • Works alongside battery storage systems.
  • VariSine™ PWM technology.
  • Energy monitoring on the go via the myenergi app.
  • Works with heat pumps when used with an optional Relay and Sensor Board.

General information

Color

White

Grey

Finish

Painted

Material

Zintec steel

Shape

Rectangle

Length

220 mm

Width

87 mm

Height

205 mm

Warranty description

Three year

Uniclass

Pr_80_51_51_22 Digital metering equipmentPrimary

CAWS

V90/312 Photovoltaic system

V90/312 Photovoltaic system

Specification data - Digital metering equipment

Standards

LVD 2014/35/EU, EMC 2014/30/EU, EN 60335-1:2012, EN 55014-1:2006, EN 55014-2:1997+A1:2001+A2:2008, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008.

Display

Graphical LCD with LED backlight.

Guidance for specification option:

Shows heating status and savings data.

Rated voltage

230 V AC.

Guidance for specification option:

±10%.

Phase arrangement

Single phase.

Current measuring range

16 A.

Rated frequency

50 Hz.

Mounting

Wall mounting bracket.

Ingress protection (minimum)

IP20.

Outputs

Two (sequential operation with selectable priority).

Control

VariSineTM pure sine wave (Pulse Width Modulation) power control.

Switch

Integral On/ Off/ Bypass Switch.

Manufacturer guidance

Bypass switch.

LED

LED indication: Supply On. Heater 1 and Heater 2 active.

InputPower

3.68 kW.

Standby power

3 W typical.

Manufacturer guidance

Standby power consumption.

Heater

100 W–3.68 kW.

Manufacturer guidance

Heater load size.

Interfaces

868/ 915 MHz (proprietary protocol) for wireless sensor and remote monitoring options.

Sensor

100 A maximum primary current, 16 mm maximum cable diameter.

Manufacturer guidance

Grid current sensor.

Cable entry

Bottom entry.

Weight

4.3 kg (excluding wall bracket).

Operating temperature

-20°C to +40°C.

Accessories

None.

Harvi - Wireless energy harvesting sensor.

Guidance for specification option:

Enables myenergi products to be installed without using a hardwired current transformer. The harvi prevents the need to lift up floors and disrupt home decor. It harvests its own power from the CT clamps, removing the need for batteries or an external power supply.


Specifications:

  • CT inputs: 3 inputs enable 3-phase or multi-point power measurement.
  • Measurement range: 25–15 kW (50 Hz a.c., import and export).
  • Energy harvesting range: 0.2 A to 65 A (including reactive current).
  • Accuracy: 2.5% typical.
  • Transmission rate: 1s at 1A+, <10s at 0.5-1A, <30s at <0.5A.
  • Wireless interface: 868 MHz (proprietary protocol).
  • Mounting location: Indoor only (can be housed in an IP-rated plastic box if required).
  • Operating temperature: -30°C to +50°C.
  • Dimensions: 98 x 98 x 36 mm.

Relay and sensor board.

Guidance for specification option:

Enables eddi to work with heat pumps.

  • Economy tariff sense input (eSense): 230 V a.c. sensing (2.5 kV isolated).
  • Multifunction relay: 2x 16 Amp.
  • Temperature sensor inputs: 2x PT1000.

Sustainability data

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Zintec steel

Manufacturing plant location

Literature

eddi Datasheet

eddi Datasheet

harvi Datasheet

harvi Datasheet