NBS Source
I'm a manufacturer
Compare variants

myenergi - zappi - 7kW Tethered EV Charger

Verified by manufacturer 2 months ago

Tethered Black 7kW - ZAPPI-2H07TB-G

myenergi ltd Variant:

Electric vehicle charging point.

Jump to:
+44 (0)333 300 1303 Website

Application

Mode 3 single socket wall mounted EV charge point, for both domestic and commercial use.

Description

zappi is an electric vehicle charging point with three charging modes. Those with grid-tied microgeneration systems like wind or solar can use the ECO setting to save on their energy bills. The charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station.


Charging modes:

  • ECO: Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will continue until the vehicle is fully charged, even if power is drawn from the grid.
  • ECO +: Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will pause if there is too much imported power, continuing only when there is surplus free power available.
  • FAST: In this mode, the vehicle will be charged at maximum power. This is just like an ordinary Mode 3 charging point.


Technical characteristics:

  • Dynamic load balancing: Optional setting to limit current drawn from the unit supply or the grid.
  • Economy tariff sense input: 230 V a.c. sensing (4 kV isolated).
  • Load and external CTs designed to meet Class B (1%) of EN 50470. Load: 0.25–5(32)A, External CTs: 0.25–5(100)A.
  • In addition to the wide range of voltages below the eSense input can also work with a volt-free contact. Range 3.3–230 Vrms, volt free contact (24 V d.c. supplied from the zappi).


Features and benefits:

  • Three charging modes: ECO, ECO + and FAST.
  • Optimises microgeneration self-consumption.
  • Works with solar PV or wind turbine systems.
  • Economy tariff sense input.
  • Programmable timer function.
  • Charge and event logging.
  • Pin-code lock function.
  • Ethernet port and built-in WiFi for connecting to the internet.
  • Automatic firmware checking.
  • Tap operated display backlight.
  • Integral cable holster.
  • Remote control and monitoring through the myenergi app.
  • Supplied with clip-on grid sensor(s).
  • Works alongside battery storage systems.
  • A future proof installation.
  • OZEV (home/ work scheme) approved.

General information

Color

Black

White

Material

Acrylonitrile styrene acrylate (ASA)

Polycarbonate

Manufacturer guidance

Enclosure.

Shape

Other

Length

439 mm

Width

282 mm

Height

122 mm

Warranty description

Three year

Uniclass

Pr_65_72_97_29 Electric vehicle charging pointsPrimary

CAWS

V90/590 Equipment

V90/590 Equipment

V90/312 Photovoltaic system

V90/312 Photovoltaic system

Specification data - Electric vehicle charging points

Standards

To EN IEC 61851-1, EN IEC 61851-21-2, EN 300220-1/2, EN 300328, EN 301489-1/3/17.

Guidance for specification option:

CE and UKCA compliant; LVD, EMC, RED, ROHS.

Complies fully with the requirements of BS EN IEC 61851-1:2019 with the exception of Clause 8.4 in order to meet the requirements of BS 7671:2018 Amendment 1:2020. BS7671:2018 permits the protective earth conductor be switched in order to provide protection against a damaged PEN conductor in a TN-C-S earthed system.

Charging mode

3.

Input voltage

230 V a.c. single-phase.

Input current

6–32 A (variable).

Rated frequency

50 Hz.

Power output

7 kW.

Outlet type

Type 2 tethered cable (6.5 m).

Mounting

Indoor or outdoor (permanent mounting).

Impact protection (minimum)

To BS EN 62262, IK10.

Ingress protection (minimum)

IP65.

Circuit protection

6 mA DC residual current protection (RDC-DD in accordance with EN 62955).

Accessories

None.

Harvi - Wireless energy harvesting sensor.

Guidance for specification option:

Enables myenergi products to be installed without using a hardwired current transformer. The harvi prevents the need to lift up floors and disrupt home decor. It harvests its own power from the CT clamps, removing the need for batteries or an external power supply.


Specifications:

  • CT inputs: 3 inputs enable 3-phase or multi-point power measurement.
  • Measurement range: 25–15 kW (50 Hz a.c., import and export).
  • Energy harvesting range: 0.2 A to 65 A (including reactive current).
  • Accuracy: 2.5% typical.
  • Transmission rate: 1s at 1A+, <10s at 0.5-1A, <30s at <0.5A.
  • Wireless interface: 868 MHz (proprietary protocol).
  • Mounting location: Indoor only (can be housed in an IP-rated plastic box if required).
  • Operating temperature: -30°C to +50°C.
  • Dimensions: 98 x 98 x 36 mm.


Display

Graphical backlit LCD.

Operating temperature

-25 to +40°C.

Colour

Black.

Standby power

3 W.

Manufacturer guidance

Standby power consumption.

Interfaces

868/915 MHz (proprietary protocol) for wireless sensor and remote monitoring options.

Manufacturer guidance

Wireless interface.

Connectivity

2.4 GHz 802.11 b/g/n connection up to 150 Mbps.

Manufacturer guidance

WiFi connectivity.

Sensor

100 A maximum primary current, 16 mm maximum cable diameter.

Manufacturer guidance

Grid current sensor.

Cable entry

Rear or bottom.

Sustainability data

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Acrylonitrile styrene acrylate (ASA)

Polycarbonate

Manufacturer guidance

Enclosure.

Manufacturing plant location

Literature

zappi Datasheet

zappi Datasheet

harvi Datasheet

harvi Datasheet

Similar products from myenergi ltd

myenergi - zappi - 7kW Untethered EV Charger

myenergi - zappi - 7kW Untethered EV Charger