Compare

Net2 Plus 12V 2A PSU, Metal Cabinet

Name: Net2 Plus 12V 2A PSU, Metal Cabinet
Brand: Paxton Access Ltd
SKU: mViZBGWqNMuteBED3rrrx7

Verified by manufacturer 1 day ago

Paxton Access Ltd

Third party certifications:

UL Listed
Certificate type

A single door control unit in 12V 2A PSU Metal Cabinet that connects to the IP infrastructure using an RJ45 plug into a standard TCP/IP Ethernet network and makes access control decisions.

Jump to:

BOS

+44 (0)1273 811011 Website

Application

Installation – There is a label on the Net2 plus control unit that clearly shows colour coded connections for reader, power supply etc. The unit has a voltage free relay and so can switch any lock or electrical device. Exit buttons, door contacts, tamper switches and alarm devices may be connected.

Control units communicate to the PC via the standard TCP/IP protocol of a LAN. The Net2 plus control unit should be given a fixed/static IP address. All configuration of the unit is done using the Net2 Configuration Utility.

There are diagnostic LEDs mounted close to their relevant terminals to assist with trouble free installation. End of line resistors can be switched into the circuit as required. External terminating resistors are not required.

Any changes made at the PC are immediately communicated and stored at the control unit. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.

Description

Net2 Plus is a single door access control unit. It has on-board TCP/IP to allow direct connection to a computer network, this can save time, money and result in a better, more resilient system.

Features and benefits:

Can also be connected together using a dedicated RS485 network. This reduces the number of TCP/IP network points required for larger systems.
Hardware features include the following: Volt free control relay x 2, Input for PSU fail, Input for tamper, Alarm output, Dedicated intruder alarm input.
The 12V 2A Power supply unit is available in either a plastic or metal cabinet.
The cabinet can house both the 12V 2A PSU and a Net2 and the option to accommodate a 12V/7Ah back up battery if desired.
A tamper switch is also installed which registers an alarm if the lid is opened when connected to an ACU.
Single door networkable access control unit.
Plug into a TCP/IP network using a RJ45 plug.
Features a built in TCP/IP converter.
Different control units can be mixed on a site.
FLASH memory allows easy upgrades.
Use Paxton or 3rd party readers.

The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control unit also has a RS485 connection. This means it can be connected to other Net2 plus control units using a dedicated CAT5 cable.

One Net2 plus control unit can be the network interface to the LAN and also run a wired RS485 daisy chain of other Net2 plus units, removing the need for an independent TCP/IP to RS485 converter. Net2 plus is also available with a Power over Ethernet (PoE) power supply. PoE is a technology that allows both power and data to be passed along Ethernet cabling. Net2 plus with PoE simply plugs straight into the existing LAN using a standard RJ45 plug (providing it is powered by either a compatible PoE switch or a PoE injector).

Net2 Plus is supplied as a PCB only or in a cabinet with or without a power supply. Both metal and plastic cabinets are available, with a 2A or PoE+ power supply. Both metal and plastic cabinets are available, with a 2A (battery backup recommended) or PoE+ (UPS recommended) power supply.

General information

Color	White
Finish	Coated
Material	Metal
Shape	Rectangle
Length	320 mm
Width	236 mm
Height	80 mm
Warranty description	Five year

Uniclass	Pr_75_30_30_03 Access control unitsPrimary Ss_75_40_02_11 Card access control systems
CAWS	W90/130 Electronic access control systems W90/363 Access control units

Product range	Net2 Door Controllers Net2

Specification data - Access control units

Type of operation	Networked.
Number of doors per controller	One.
Number of users (minimum)	- Manufacturer guidance The maximum user limit is 50 000.
Communication interface	Ethernet. RS-485.
Interfaces	-
Readers	Four.
Request-to-exit buttons	One.
Rated operational voltage (Ue)	12 V d.c.
Rated operational current (In)	200 mA.
Battery backup	-
Battery location	Not required. Internal to controller. Guidance for specification option: Optional.
Control features	-
Time between credential presentation and door unlock (maximum)	5000 seconds.
Enclosure	-
Material and finish	Metal, powder coated.
Accessories	2A/12V DC power supply. Guidance for specification option: 857-090. 2A/12V DC power supply - Metal cabinet. Guidance for specification option: 857-693. Net2 Plus 1 door controller - 12V 2A PSU, Metal cabinet. Guidance for specification option: 682-813.