Verified by manufacturer 1 month ago
UL Listed
Certificate type
A single door control unit in 12V 2A PSU Metal Cabinet that connects to the IP infrastructure using an RJ45 plug into a standard TCP/IP Ethernet network and makes access control decisions.
Installation – There is a label on the Net2 plus control unit that clearly shows colour coded connections for reader, power supply etc. The unit has a voltage free relay and so can switch any lock or electrical device. Exit buttons, door contacts, tamper switches and alarm devices may be connected.
Control units communicate to the PC via the standard TCP/IP protocol of a LAN. The Net2 plus control unit should be given a fixed/static IP address. All configuration of the unit is done using the Net2 Configuration Utility.
There are diagnostic LEDs mounted close to their relevant terminals to assist with trouble free installation. End of line resistors can be switched into the circuit as required. External terminating resistors are not required.
Any changes made at the PC are immediately communicated and stored at the control unit. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.
Net2 Plus is a single door access control unit. It has on-board TCP/IP to allow direct connection to a computer network, this can save time, money and result in a better, more resilient system.
Features and benefits:
The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control unit also has a RS485 connection. This means it can be connected to other Net2 plus control units using a dedicated CAT5 cable.
One Net2 plus control unit can be the network interface to the LAN and also run a wired RS485 daisy chain of other Net2 plus units, removing the need for an independent TCP/IP to RS485 converter. Net2 plus is also available with a Power over Ethernet (PoE) power supply. PoE is a technology that allows both power and data to be passed along Ethernet cabling. Net2 plus with PoE simply plugs straight into the existing LAN using a standard RJ45 plug (providing it is powered by either a compatible PoE switch or a PoE injector).
Color | White |
Finish | Coated |
Material | Metal |
Shape | Rectangle |
Length | 320 mm |
Width | 236 mm |
Height | 80 mm |
Warranty description | Five year |
Uniclass | |
CAWS | W90/363 Access control units W90/130 Electronic access control system |
Product range |
System supplier | Paxton Access Limited. |
Equipment interconnectivity | Wired. |
Cable type | Two way plug UL. |
System accessories | 2A/12V DC power supply.Guidance for specification option: 857-090. 2A/12V DC power supply - Metal cabinet.Guidance for specification option: 857-693. Net2 Plus 1 door controller - 12V 2A PSU, Metal cabinet.Guidance for specification option: 682-813. |
Current | 12 V d.c. |
Frequency | 50–60 Hz. |
NominalSupplyVoltage | 100–240 V a.c. |
Operating temperature | 0–45°C. |
Material | Metal |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 1 | |
- | 1 |