NBS Source
I'm a manufacturer
Compare variants

Newton HydroBond 109-LM - Rubber Waterproofing Membrane

Verified by manufacturer 3 months ago

109LV

Newton Waterproofing Systems Variant:
Third party certifications:
  • KIWA BDA

    KIWA BDA

    Certificate type

Radon-certified rubber waterproofing membrane.

Jump to:
BOS
+44 (0)1732 360095 Website

Application

Suitable for the external waterproofing of earth retaining structures such as basements and foundation walls.

Description

Radon-certified, flexible, single-component, cold-applied and seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls.


HydroBond 109-LM is puncture resistant with elasticity of 850% and a 95% recovery memory. The membrane becomes fully engaged into the substrate to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects.


HydroBond 109-LM is available in two variants: Medium Viscosity, for use in warmer temperatures, and Low Viscosity, for when it is cooler. HydroBond 109-LM is also a constituent product of the Newton HydroBond® System supported by BDA Agrément Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1a, 1b, 2 & 3 – BS 8102:2022.


Surface preparation is required, as is protection after application - consult manufacturer for details.


Features and benefits:

  • Fully-bonded seamless membrane.
  • Good elasticity with no shrinkage.
  • Medium/Low Viscosity variants instantly raintight when sprayed with HydroBond 109-LM Catalyst.
  • Primer not required for most substrates.
  • Complete vapour barrier.
  • Solvent free, non-toxic and odourless.
  • Non-flammable – No VOCs.
  • High radon gas resistance.


Curing:

  • Ready for next coat: At 5°C: After 24 hours; at 10°C: After 12 hours; at 15°C: After 2 hours; at 20°C: After 24 minutes; at 25°C: After 12 minutes.
  • To be kept rain-free: At 5°C: For 24 hours; at 10°C: For 12 hours; at 15°C: For 1 hour; at 20°C: For 30 minutes; at 25°C: For 30 minutes.
  • Ready for temporary foot traffic/ protection boards: At 5°C: After 24 hours; at 10°C: After 12 hours; at 15°C: After 2 hours; at 20°C: After 1 hour; at 25°C: After 1 hour.
  • Ready for flood/ hosepipe test: At 5°C: After 48 hours; at 10°C: After 24 hours; at 15°C: After 4 hours; at 20°C: After 3 hours; at 25°C: After 2 hours.
  • Fully cured: At 5°C: After 48 hours; at 10°C: After 24 hours; at 15°C: After 8 hours; at 20°C: After 5 hours; at 25°C: After 3 hours.

General information

Color

Brown

Finish

Smooth

Guidance for specification option:

Smooth matte black finish.

Material

Rubber

Guidance for specification option:

Rubber waterproofing membrane.

Shape

Formless

Uniclass

Pr_25_57_51_66 Polymeric membranesPrimary

CAWS

J30/130 Cold-applied damp-proofing

J30/10 Cold-applied damp-proofing

Product range

Liquid Waterproofing Membranes

Specification data - Polymeric membranes

Material

Rubber.

Performance characteristics

-

Reaction to fire

Euroclass B2.

Watertightness

7 bar.

Tensile properties

Tensile strength and elongation at break: Reinforced: 0.68 N/mm²; Reinforced/ aged: 0.58 N/mm².

Third-party certification

BDA Agrement BAB-18-067-P-A-UK.

Width (minimum)

1 mm.

Colour

Brown/ Black.

Material

Rubber

Guidance for specification option:

Rubber waterproofing membrane.

Density / Specific gravity

1.03.

Shelf life

12 months.

Application rate in 1 to 2 coats - RC walls

1.6 L/m².

Application rate in 2 coats - Joints in concrete walls - band of 250 mm

3.2 L/m².

Application rate in 2 to 4 coats - Block and ICF walls

3.2 L/m².

Application rate in 2 to coats - Radon barrier and horizontal elements

3.2 L/m².

Application method

Brush, roller and airless spray.

Application temperature

+5 to +40 °C.

Service temperature

-15 to +40 °C.

Odour Slight

Resinous odour.

VOC

Does not contain solvents.

Viscosity

Low.

pH

11–13.

Membrane thickness - RC walls

1.0 mm.

Membrane thickness - RC joints

2.0 mm.

Membrane thickness - Block and ICF walls

2.0 mm.

Membrane thickness - Radon barrier and horizontal elements

2.0 mm.

Density/Specific Gravity (no reinforcement)

1.1.

Softening temperature > 130°C

>130°C.

Adhesion to concrete 0.62 N/mm²

0.62 N/mm².

Loading capability (no reinforcement) - Class

1 0.06 MN/mm².

Resistance to static indentation (reinforced)

250 N.

Crack bridging ability (no reinforcement) - Class CB2

≥2 mm.

Dimensional stability at high temperature - no dripping

≥70 °C.

Water vapour diffusion resistance – Sd value

72.4 m.

Water vapour diffusion resistance - µ value

36 200 µ.

Water vapour diffusion resistance

362 MN·s/g.

Water resistance - 21 days at 21°C

Watertight.

Radon gas diffusion resistance (1 mm membrane)

2.1 x 10^-11 m²/s.

Capacity

20 L.

Sustainability data

Contains Red List materials

Yes

Material

Rubber

Guidance for specification option:

Rubber waterproofing membrane.

Recyclability

0

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

5

IFC

IFC2X3

2

Third party certifications

KIWA BDA

KIWA BDA

Newton HydroBond 109-LM - KIWA BDA Certificate

Literature

HydroBond 109-LM BDA Certificate

HydroBond 109-LM BDA Certificate

Case studies

Waterproofing A New Doctor’s Surgery, Devon

Waterproofing A New Doctor’s Surgery, Devon

Similar products from Newton Waterproofing Systems

Seamless Rubber Waterproofing Membrane Newton HydroBond 108-LM for External Waterproofing of Basements - Seamless Rubber Waterproofing Membrane

Seamless Rubber Waterproofing Membrane Newton HydroBond 108-LM for External Waterproofing of Basements - Seamless Rubber Waterproofing Membrane