Off Peak Power Storage - Battery Storage System
Verified by manufacturer 15 days ago
3 kW Battery Storage System [T-BAT-SYS-HV3.0]
3 kW Battery Storage System [T-BAT-SYS-HV3.0]
Off-peak battery power storage system.
Application
- Suitable for domestic and light commercial properties.
- Suitable for indoor/ outdoor installation with floor mounting support (IP65 rated).
Description
The Cürv® off-peak power store is a high performance expandable battery storage system; suitable for any size home.
Our off-peak batteries are designed to charge during periods of lowest electricity demand, storing energy for when you need it, reducing reliance on the grid.
Features and benefits:
- Combined solution.
- Systematic design, in-depth optimization and seamless connection with Solax Hybrid inverter.
- Battery heating technology, which is capable to work at low temperature (with Hybrid G4 inverter).
- Safe type of LiFePO4 battery, an adoption of high-performance processors.
- Modular stacking design, easy installation, supporting floor mounting.
- Auto power replenishment technology is adopted to prevent battery over-discharge.
- IP65, supporting indoor and outdoor installation.
- Remote fault diagnosis, upgrade and maintenance.
- Multiple communication interfaces: RS485, CAN.
- International brand devices, better stability.
- Long life cycle, more than 6000 times.
- Battery available in four voltages: 3 kW, 6 kW, 9 kW and 12 kW.
- Support high power loads when the grid goes down.
- Safety certifications: TUV, CE, UN38.3.
Components:
- BMS: Battery Management System (MC0600).
- Battery: 3 kW, 6 kW, 9 kW or 12 kW battery (HV10230).
- Hybrid inverter (X1 G40-Hybrid 3.7 T).
General information
Color | White |
Finish | Other |
Shape | Rectangle |
Length | 153 mm |
Width | 482.5 mm |
Height | 471 mm Guidance for specification option: MC0600 (BMS). 173 mm Guidance for specification option: HV10230 (Battery). |
Warranty description | Ten year |
Uniclass | |
CAWS | V90/312 Photovoltaic systems V90/590 Equipment |
SKU Code | T-BAT H 3.0, T-BAT H 6.0, T-BAT H 9.0, T-BAT H 12.0 |
Specification data - Energy storage batteries
Standards | |
Safety | To IEC 62109-1/-2. |
Grid connection | In accordance with EREC G98 and G99. |
Third-party certification | TUV, CE, UN38.3, IEC 62619, IEC 62040 and UKCA. |
Supply voltage | Single-phase 220–240 V a.c. 50/60 Hz |
Architecture | Grid connected. |
Integration with other systems | Manufacturer guidanceConsult manufacturer for details and insert requirements or omit. |
Configuration | Packaged. |
Controller | |
Control functions | Manufacturer guidanceConsult manufacturer for details and insert requirements. |
Communications | RS 485/ CAN2.0. |
Visual indication | Master control LED indicator. Guidance for specification option:
|
Inverter | X1-HYBRID-3.7T. |
Protection | a.c. surge protection. |
Total harmonic distortion (THD) | <2%. |
Batteries | |
Capacity | |
Effective | 30 Ah. |
Depth of discharge (DoD) | 90%. |
Location | Within the main energy storage unit. |
Type | Lithium iron phosphate (LiFeP04). |
Charging | Manufacturer guidanceConsult manufacturer for details and insert requirements. |
Service conditions | Operating temperature range: -30℃ to 50℃. Minimum storage temperature: -20℃ to 50℃ (3 months). Relative humidity: 0–100%. Altitude: below 3000 m. |
Enclosure | |
Material | Steel. |
Finish | Painted. |
Colour | White. |
Ingress protection (minimum) | IP65. |
Nominal voltage | 102.4 V. |
Operating voltage | 90–116 V. |
EnergyUsed | Total energy: 3.0 kWh. Useable energy: 2.8 kWh. Manufacturer guidanceUseable energy test conditions: 90% DOD, 0.2 C charger and discharger at +25°C. |
Power | 2.5 kW. |
Maximum power usage | 3.1 kW. |
Current | 25 A. Guidance for specification option: Maximum charge/ discharge current: 30 A (may be variant with different inverter models). Manufacturer guidanceRecommend charge/ discharge current. |
Cycles | 6000 cycles. Manufacturer guidanceCycle life (90% DoD). |
Dimensions | MC0600 (BMS): 482.5 x 173.5 x 153 mm. Guidance for specification option:
|
Inverter | X1-HYBRID-3.7T. Guidance for specification option:
|
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |