Paxton10 Controller, PCB Only - Single Door Access Control Unit
Verified by manufacturer 28 days ago
A single door IP based intelligent door controller - PCB only, supplied with no additional housing. For use in star configured systems with multi-door PSUs.
Application
The door controller is equipped with 4 inputs, tamper, 230v fail, door contact and RTE.
An intruder alarm can be integrated using the Paxton10 alarm connector.
Mains and Power over Ethernet (PoE) powered options also available. This product is also available in a plastic enclosure.
Installation – The wiring label on the Paxton10 Door Controller clearly shows colour coded connections for the readers, power supply, lock etc. The 12v output for the lock can be used to control any door, barrier or gate. Diagnostic LED’s indicate the status of the controller and its inputs and outputs.
Controllers are connected directly to the network via TCP/IP. They are automatically visible in the Paxton10 software under the devices menu.
Operation – Any changes made in the Paxton10 software are immediately communicated to the door controller. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.
Description
Paxton10 Door Controllers are the building blocks of the Paxton10 system. Each one provides control of a single door and a port to allow support for up to three Paxton10 connectors for additional functionality. A single Paxton10 system can include up to 1000 door controllers.
Features and benefits:
- Paxton10 Door Controllers are the building blocks of the Paxton10 system.
- Each one provides control of a single door and a port to allow support up to three Paxton10 connectors for additional functionality.
- A single Paxton10 system can include up to 1000 door controllers.
Power consumption:
- While battery charging - Idle - 97 mA/5.08 W.
- While battery charging - Max - 108 mA/5.6 W.
- While battery full - Idle - 48 mA/2.53 W.
- While battery full - Max - 105 mA/5.5 W.
- Backup battery - 12 V DC, 7 Ah (Optional).
- Relay rating - 30 V DC/ 2A.
- RS485 connector output - 24 V DC, 750 mA max (Paxton connectors only).
- RS485 reader output - 12 V DC, 1 A max (Paxton readers only).
- Controller input voltage - 12 - 24 V DC (suppression at 28 V).
- PoE Power Supply - INPUT: 36-57 V DC, 25.5 W (IEEE 802.3at Type 2) OUTPUT: 12.8 V DC, 1.8 A.
- 4A Power Supply - INPUT: 100-240 V AC, 50/60 Hz, 1.2 A; OUTPUT: 13.8 V DC, 2 A.
General information
Color | Silver |
Material | Acrylonitrile butadiene styrene (ABS) |
Shape | Rectangle |
Length | 127 mm |
Width | 141 mm |
Height | 25 mm |
Warranty description | Five year |
Uniclass | |
CAWS | W90/363 Access control units W90/130 Electronic access control system |
Product range |
Specification data - Card access control systems
System supplier | Paxton Access Limited. |
System type | Networked stand-alone single door controller. |
Equipment interconnectivity | Wired door controller. |
Control software | Paxton10. |
Readers | Read IN/OUT. |
Locking mechanisms | Voltage clean relay (two).Guidance for specification option: Rated at 30 V d.c. 2 A or programmable output rated at 12 V d.c., 1 A or 24 V d.c., 500 mA. |
Controls | Access control units. |
Door status monitoring | Door status monitoring devices. |
Containment accessories | Manufacturer guidanceConsult manufacturer and insert requirements. |
Rewireable installation | Required. |
Operating temperature | 0–45°C. |
Sustainability data
Country of product manufacture | United Kingdom |
Material | Acrylonitrile butadiene styrene (ABS) |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 IFC | - | 1 |
 Revit | - | 1 |
Literature
Paxton10 Controller, PCB only - Data sheet