Pedeck Composite - Composite Decking System

Pedeck Composite Decking is a long-lasting, rot-proof, slip resistant surface, that offers a great combined contemporary and traditional style to flat roofs, balconies, terraces and/ or any other raised area.

The composite decking can be installed using its woodgrain side, or reversed to show its grooved side for a more traditional look. Not only does it meet all the safety requirements for high rise balconies, roof terraces and walkways, it is also simple to fit.

All of Pedeck composite is fixed into place using a specialist T-Fixing system and can be installed on a timber subframe, or for the ultimate maintenance free decking, a recycled plastic composite subframe.

10 year warranty against structural failure and Pedeck composite is 100% recyclable at the end of use.

Pedeck Composite is available in the following colours: 

• Anthracite - Anthracite is a darker grey colour, sitting between Slate Grey and Charcoal. This modern board will compliment any roof/ elevated space, especially homes with darker window and door features.
• Ash Grey - Ash Grey is a beautiful light toned board, perfect for brightening up an old looking roof/ elevated space. With a blend of grey and white tones, Ash invites a welcoming decking space, whilst remaining modern and stylish. Bring the beach feeling to the project.
• Slate - Slate Grey has a lovely multi-tonal woodgrain effect, with varying grey colours and a subtle hint of blue apparent within the surface of the board, allowing for an easy match to the colour scheme of any project.
• Charcoal - The stunning Charcoal board can be used as main colour for a whole decking project, or incorporated as a complimenting colour alongside another Pedeck composite boards. Charcoal offers a contrasting deep black tone, bringing a classy appeal to any roof/ elevated area.
• Oak - Oak offers a rich mid brown tone bringing the traditional wood appeal without the hassle.
• Teak - Bringing a multi-tonal effect, Teak has a warm wood base with a subtle hints of red undertones, giving your roof/ elevated space a traditional finish.
• Maple - Maple is a lighter wood-toned brown, with natural undertones, inspired by maple and pine.

The Pedeck Ali non-combustible decking system has six main component parts as standard:

• Decking - Boards come as standard 146 mm x either 3.6 m or 5 m. Bespoke sizes can be made depending on order quantity.
• Bearers - Composite bearers take the hassle out of water proofing wood bearers and ensure the decking lasts longer. This also drops the weight of the project, making it easier to for the contractor to handle and install safely.
• Pedestals - A range of pedestals are available that can go from 18 mm to 66 mm using spacer technology. Pedestals with self levelling heads to allow for 1–5° falls are also available.
• Rubber pads - Rubber pads add an extra layer of protection to the roof and extra grip support to the pedestals. You can even order more to use under furniture when decking is complete to protect the decking from scratches and bruises.
• Edge trims - Edge trims go on the open face of the decking, making a clean finished look to any part of the deck that will be seen.
• T-Fixings and end clips - Specially designed T-fixings and end clips giving you a valid warranty and easy installation.

Technical information:

Board length:

• 3.6 m.
• 5 m.

Board width:

• 146 mm.

Depth:

• 25 mm.

M² per board:

• 3.6 m - 0.54 m².
• 5 m - 0.75 m².

Material:

• Composite.

Weight per kg:

• 3.6 m - 10.5 kg.
• 5 m - 14.2 kg.

Bearer spacing:

• 300 mm.

Finish:

• Woodgrain/ Grooved.

Perimeter expansion:

• 10–12 mm.

End on end expansion:

• 3.6 m - 5–8 mm.
• 5 m - 8–10 mm.

Rubber base pads sizes:

• 100 x 100 mm.
• 120 x 120 mm.
• 150 x 150 mm.
• 200 x 200 mm.
• 250 x 250 mm.
• 300 x 300 mm.
• 400 x 400 mm.
• 600 x 600 mm.
• 1000 x 1000 mm.

Thicknesses for base pads:

• 3 mm.
• 5 mm.
• 6 mm.
• 8 mm.
• 10 mm.