NBS Source
I'm a manufacturer

PermaQuik PQ6100 Built-up Warm Roof System

Verified by manufacturer 5 months ago

Radmat Building Products Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Warm Roof Application - Liquid-applied hot melt monolithic waterproofing system with integral reinforcement and protective access sheet membrane designed for use in warm flat roof build-ups.

Jump to:
+44 (0)1858 410372 Website

Application

Green and Blue Roof applications on Podiums, Flat Roofs, Balconies and Walkways.

Description

PermaQuik PQ6100 is a one-part, hot-applied, seamless rubberised self-healing hot melt monolithic membrane roofing system. Manufactured in the UK from bitumen, natural rubbers, and a blend of polymers, PermaQuik PQ6100 combines excellent waterproofing performance with toughness, flexibility, and strong adhesion to a variety of substrates. PermaQuik PQ6100 can be installed in zero falls applications and is BBA Certified for ‘lifetime of the building’ in protected (inverted) roof constructions, including green/ blue roofs.


The membrane is to be applied by a Radmat Building Products Ltd approved contractor.


Features and benefits:

  • Fully-bonded to structure.
  • Fire Safety: Approved Document B compliant with comprehensive 3rd-party Fire Certification to BROOF(t4).
  • Complies with Building Insurance Technical Design Standards (e.g. NHBC, LABC, Premier Guarantee).
  • Suitable for new build and refurbishment projects typically over a concrete deck.
  • Effective Total System Thickness: 8-10 mm.
  • Fast rate of installation in temperatures as low as -18°C.
  • ISO 9001/ ISO 14001 accreditation.


Substrates:

  • Concrete: Use traditional methods of concrete curing (i.e. water curing/ wet coverings/ paper/ plastic sheets). Obtain approval from Radmat where concrete curing compounds (other than sodium silicate based) or release agents are proposed.
  • Precast concrete and concrete block: Decks to BS 6229 and BS 8217.
  • Metal/ plywood/ timber boarding: Surfaces to be free of oil, rust, paint or coatings which may inhibit the bond. Plywood must be WBP with durable ply species.


Substrate preparation:

Remove laitance, curing compound and form release agent from surface of concrete slabs by mechanical scarification, grinding, blast cleaning or chemical cleaning. Remove and smooth away any fins and nibs. Make good tie holes and damaged area with latex modified patching mortars, ensuring edges are slightly undercut. Existing surfaces must not be power washed prior to carrying out any works.

Ensure all detailing and flashings are completed before installing the membrane.


Primer:

EshaPrimer – a quick-drying bitumen-based primer for concrete surfaces. EshaPrimer requires between 1 and 4 hours to completely dry. EshaPrimer must be completely dry before applying the bitumen membrane. For additional protection two layers can be used.


BlackOut Roofing Surface Conditioner - a low viscosity, high penetration, cold applied bituminous solution designed to prime and seal porous roof surfaces prior to the application of bituminous materials. BlackOut Roofing Surface Conditioner requires between 1 and 4 hours to completely dry. BlackOut Roofing Surface Conditioner must be completely dry before applying the bitumen membrane. For additional protection two layers can be used.


Insulation materials:

Radmat recommend the use of ProTherm FOAMGLAS Insulation for built-up Warm Roof applications.


Surface Protection:

A minimum loading of 80 kg/m² to prevent the effects of floatation is required on all inverted roofing applications, additional loading may be required in accordance with wind-uplift calculations. This can comprise of Radmat MedO Green Roof finishes, Washed Stone Ballast, Pavers and other trafficable surfaces. 

General information

Color

Black

Finish

Mineral

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

40 year

Guidance for specification option:

Standard warranty duration.

Uniclass

Ss_30_40_30_43 Liquid-applied warm roof covering systemsPrimary

CAWS

J21/10 Warm deck roof coating

J31/120 Warm deck roof coating

Specification data - Liquid-applied warm roof covering systems

Preparation

-

Horizontal work

Not required.

EshaPrimer.

Red Primer.

EshaFlex SA Primer.

BlackOut Roofing Surface Conditioner.

Skirtings and vertical work

Not required.

EshaPrimer.

Red Primer.

EshaFlex SA Primer.

BlackOut Roofing Surface Conditioner.

Air and vapour control layer

Not required.

AluBase XL.

Guidance for specification option:

A self-adhesive bituminous waterproofing membrane that forms a barrier against vapour and gases.

EshaBase ALU.

Guidance for specification option:

A torch applied aluminium cored vapour barrier for bituminous roofing-systems.

Vedatop SU.

Guidance for specification option:

A self-adhesive SBS-modified base layer reinforced with a high tear resistant carrier.

Insulation

-

Type

ProTherm FOAMGLAS® Flat Board.

ProTherm FOAMGLAS® Tapered Board.

Fixing

EshaPur 95/25 Oxidised Bitumen.

Guidance for specification option:

A hot applied oxidised bitumen solution for use on metal, concrete, stone or timber. 95/25 is a bituminous product manufactured by air blowing of penetration grade bitumen, at high temperature, resulting in a material of a much higher penetration index. 

FOAMGLAS® PC®58 Cold Adhesive.

Guidance for specification option:

A solvent-free two- component adhesive.

Insta Stik.

Guidance for specification option:

Developed for the attachment of insulation boards to a variety of substrates on flat roofs. It is a cold applied system that is, quick, easy to use and provides fast adhesion within 20–45 minutes.

Overlay

-

Type

Not required.

EshaPur 95/25 Oxidised Bitumen Surface Coat.

FOAMGLAS® PC®58 Cold Scratch Coat.

Fixing

Not applicable.

Hot-applied.

Cold applied.

Carrier membrane

-

Type

Not required.

Vedatop SU.

Fixing

Not applicable.

Self-adhesive.

Liquid-applied waterproofing

-

Type

PermaQuik PQ6100 Hot-applied polymer-modified bitumen.

Reinforcement

Radmat PQ2017 Spunbonded Polyester Fabric Reinforcement.

Surface treatment

EshaFlex 370 FireSafe UV-Stable Mineral Cap Sheet.

Standard Protection Sheet XL.

Texsa Root Barrier P.

System accessories

Not required.

Liquid Plastics VCL.

Termination and flashing bars.

Bitumen compatible sealant.

Bitumen compatible adhesive.

Permaquik pitch pour sealant.

Contact type Bonding Adhesive.

Coating protection

Radmat Standard Protection Sheet.

Radmat Heavy DutyProtection Sheet.

Permaquik PQ 2450/2550 protection board.

Manufacturer guidance

  • Radmat Standard Protection Sheet – Thickness: 1.5 mm. A SBS modified elastomeric bitumen felt with 195 g/m² polyester reinforcement core. It facilitates foot traffic access to applied membrane. Can be exposed to UV for up to 12 months.
  • Radmat Heavy Duty Protection Sheet – Thickness: 5 mm . A SBS modified elastomeric bitumen felt with 250 g/m² polyester reinforcement core. It facilitates heavy duty site traffic access to applied membrane. Can be exposed to UV for up to 12 months.
  • Permaquik PQ 2450/2550 protection board in the following thicknesses: 2.5 mm, 3 mm and 6 mm.

Water control layer

Radmat ProTherm XPS X MK Water Flow Reducing Layer.

Sustainability data

Country of product manufacture

United Kingdom

Recyclability

No

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

97/3336 PermaQuik PQ6100

Literature

EshaFlex 370 FireSafe Product Data Sheet

EshaFlex 370 FireSafe Product Data Sheet

FOAMGLAS® T3+ Tapered Product Data Sheet

FOAMGLAS® T3+ Tapered Product Data Sheet

FOAMGLAS® T3+ Flat Slab Product Data Sheet

FOAMGLAS® T3+ Flat Slab Product Data Sheet

PermaQuik PQ2017 Reinforcing Fabric Product Data Sheet

PermaQuik PQ2017 Reinforcing Fabric Product Data Sheet

PermaQuik PQ6100 Hot Melt Brochure

PermaQuik PQ6100 Hot Melt Brochure

PermaQuik PQ6100 Hot Melt PDS

PermaQuik PQ6100 Hot Melt PDS

PQ2060 Detailing Membrane

PQ2060 Detailing Membrane

PQ2061 Detailing Membrane

PQ2061 Detailing Membrane

PQ6100 Substrate Preparation Guidelines

PQ6100 Substrate Preparation Guidelines

Similar products from Radmat Building Products Ltd

ParaFlex FD Warm Roof System

ParaFlex FD Warm Roof System

ReadySeal Warm Roof System

ReadySeal Warm Roof System