NBS Source
I'm a manufacturer

PermaTEC Ecowrap Inverted Roof System

Verified by manufacturer 4 months ago

AccuRoof

Hot melt monolithic waterproofing system.

Jump to:
+44 (0)1509 505714 Website

Application

PermaTEC provides a fully bonded, tough, flexible, waterproof membrane for use on inverted, green, flat including completely flat protected roofs.

Description

PermaTEC Hot Melt Monolithic Waterproofing Systems include PermaTEC EcoWRAP waterproofing compounds, that is specially formulated combinations of refined bitumen, synthetic rubbers, fillers and other additives, which are hot-applied in conjunction with carefully selected reinforcement/detailing fabrics and protection layers to give the ultimate waterproofing performance.


Features and benefits:

  • Hot applied system.
  • Suitable for zero fall roof decks.
  • BBA Certified No. 03/4009.
  • Durable – lasts the design life of the building.
  • Nominal membrane thickness of 6 mm.
  • Tough and resistant to impact damage.
  • Excellent low temperature flexibility.
  • High bond strength to substrate - High tensile strength.
  • Homogenous and seamless.
  • Seamless application and rapid setting – resistant to rain, snow and frost immediately after application.
  • Virtually no packaging to be disposed of (zero wrapper waste).

General information

Color

Black

Finish

Other

Guidance for specification option:

50 mm concrete paving.

Material

Bitumen

Rubber

Polystyrene

Polypropylene

Polymer

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

25 year

Uniclass

Ss_30_40_30_71 Reinforced bitumen membrane inverted roof covering systemsPrimary

CAWS

J41/120 Built-up reinforced bitumen membrane inverted roof covering

J41/14 Reinforced bitumen membrane inverted roof covering

Specification data - Reinforced bitumen membrane inverted roof covering systems

System performance

Waterproofing.

Preparation

-

Horizontal work

IKO Permatec primer.

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 246025000.
  • Appearance: Liquid.
  • Colour: Red.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 4 m²/Litre.
  • Drying Time: Typically 1 Hour.

IKO Permatec high penetration primer.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 24600025.
  • Appearance: Liquid.
  • Colour: Black.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 6—8 m²/Litre.
  • Drying Time: Typically 4 Hours.

Skirtings and vertical work

IKO Permatec primer.

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 246025000.
  • Appearance: Liquid.
  • Colour: Red.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 4 m²/Litre.
  • Drying Time: Typically 1 Hour.

IKO Permatec high penetration primer.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 24600025.
  • Appearance: Liquid.
  • Colour: Black.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 6—8 m²/Litre.
  • Drying Time: Typically 4 Hours.

Waterproof covering

-

First layer

-

Type

PermaTec Ecowrap.

Guidance for specification option:

A hot applied specially formulated combination of refined bitumen, synthetic rubbers, fillers and other additives.

  • Code: 24110080.
  • Product Colour: Black.
  • Product Type: Hot Melt.
  • Applied on primed deck with Flash R reinforment.

Attachment

Hot-applied.

Intermediate layer

-

Type

Permaguard F Protection Sheet.

Guidance for specification option:

IKO Permaguard-F is a sand surfaced 180 g/m² polyester based bitumen membrane. It is installed as a protection layer into the final coat of the IKO Permatec whilst it is still hot.

  • Product Colour: Black.
  • Product Finish: Sand.
  • Product Type: Hot Melt.
  • Length: 20000 mm.
  • Weight: 39 kg.
  • Width: 1000 mm.
  • Laid on hot Permatec.

Top layer

-

Type

IKO enertherm water control layer.

Guidance for specification option:

IKO enertherm WCL is used as a Water Flow reducing Layer between enertherm XPS insulation and the roof ballast layer in inverted roofs, including green and blue roof applications.

  • Code: 30400001.
  • Length: 100 m.
  • Width: 1.5 m.
  • Area per roll: 120 m².
  • Loose laid.

Attachment

Loose laid.

Detail work

-

Flashings

IKO PermaFLASH-D150.

Guidance for specification option:

A nominal 1.25 mm thick flexible bitumen EPDM polymer detailing sheet which is installed as a reinforcement layer over cracks, construction joints, changes in materials and where minor movement may occur.

  • Code: 24150000.
  • Roll weight: 4.8 kg.
  • Roll width: 150 mm.
  • Roll length: 20 m.

IKO PermaFLASH-D500.

Guidance for specification option:

A flexible bitumen EPDM polymer detailing sheet, which is installed as a reinforcement layer around rainwater outlets.

  • Code: 24500000.
  • Roll weight: 16 kg.
  • Roll width: 500 mm.
  • Roll length: 20 m.

IKO PermaFLASH-UN.

Guidance for specification option:

A very flexible un-cured neoprene rubber reinforcement sheet for use as part of the IKO Permatec hot melt waterproofing system over construction joints and structural movement joints with a maximum width of 25 mm and maximum 50% total movement.

  • Code: 24600000.
  • Roll weight: 21 kg.
  • Roll width: 300 mm.
  • Roll length: 30 m.

IKO PermaFLASH-R.

Guidance for specification option:

A 55 g/m² polyester reinforcement layer, installed between the two applications of PermaTEC EcoWrap or PermaTEC Anti- Root.

  • Code: 24991000.
  • Roll weight: 11 kg.
  • Roll width: 1 m.
  • Roll length: 20 m.

IKO PermaGUARD-F.

Guidance for specification option:

A sand surfaced 180 g/m² polyester based bitumen membrane, installed as a protection layer in standard PermaTEC and PermaTEC Anti Root systems.

  • Code: 24010000.
  • Roll weight: 42 kg.
  • Roll width: 1 m.
  • Roll length: 20 m.

Skirtings and upstands

IKO PermaGUARD-M Torch On (T-O).

Guidance for specification option:

A high performance torch applied SBS modified bitumen membrane with a 270 g/m² polyester fibre carrier. It has a black mineral finish on the upper surface and thermos-fusible film on the underside. It is installed as a protection layer to PermaTEC on exposed upstand details.

  • Code: 24030008.
  • Roll weight: 36 kg.
  • Roll width: 1 m.
  • Roll length: 8 m.

Insulation

-

Type

IKO enertherm XPS rigid extruded polystyrene (XPS) insulation.

Guidance for specification option:

IKO enertherm XPS is a lightweight, lap joined board with high compressive strength and performance.

  • Available in thickness 50—245 mm.
  • Durability: Continuous service temperature limit is up to +70º C.
  • Water Vapour Resistance: 625 MNs/g.m when tested in accordance with BS EN 12086.
  • Moisture Absorption: 0.6% by volume when tested in accordance with EN 12087.
  • Nominal Density: 32 kg/m³.
  • Loose laid.

Ballast

20—40 round washed ballast.

System accessories

Guidance for specification option:

Consult manufacturer and insert requirements.

Base layer

Deck.

Guidance for specification option:

Supplied by others.

Sustainability data

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

45 %

Guidance for specification option:

PermaTEC EcoWRAP.