Compare

Polyfoam™ Floorboard Super - Extruded Polystyrene Insulation

Name: Polyfoam™ Floorboard Super - Extruded Polystyrene Insulation
Brand: Polyfoam XPS Ltd
SKU: rTCR1K4dfsdijA9NbR98hs

Verified by manufacturer 2 months ago

Third party certifications:

A rigid extruded polystyrene (XPS) board for floor construction.

Jump to:

BOS

Application

Suitable for almost any floor construction including:

Application fields include:

A rigid extruded polystyrene (XPS) board suitable for almost any floor construction.

Features and benefits:

50 to 100 mm typical thickness.
Square edged boards.
Very high compressive strength.
Protects the damp proof membrane from damage.
Highly resistant to water absorption.
Robust and can tolerate traffic from following trades.
Represents no known threat to the environment and has zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than five.
100% recyclable.

Technical characteristics:

Moisture absorption: ≤ 1% by volume when tested in accordance with ISO 16536 and can be laid in standing water with negligible impact on the performance of the product.
Durability: Continuous service temperature limits up to +70ºC.

Typical Project types:

Uniclass	Pr_25_71_63_29 Extruded polystyrene (XPS) boardsPrimary
CAWS	K11/115 Battened plywood floating floor K11/125 Battened particleboard floating floor K11/135 Battened oriented strand board floating floor K11/145 Battened cement-bonded particleboard floating floor K11/20 Battened particleboard floating floor K11/215 Plywood floating floor K11/225 Particleboard floating floor K11/235 Oriented strand board floating floor K11/245 Cement bonded particleboard floating floor M10/290 Floating construction M10/40 Floating construction

Standard	To BS EN 13164.
Compressive strength (minimum) at 10% compression	500 kPa.
Thermal conductivity (maximum)	0.035 W/m·K.
Thickness	50 mm. 60 mm. 80 mm. 100 mm.
Face size (length x width)	1250 x 600 mm.
Edges	Lap joint.

Global warming potential	<5.
MaximumOperatingTemperature	70°C.
Water absorption	0.70.

Contains Red List materials	No
Country of material origin	United Kingdom
Country of product manufacture	United Kingdom
Material	Extruded polystyrene (XPS)
Manufacturing plant location	The Old Post Office, St Nicholas' St, Newcastle upon Tyne NE1 1RH, UK
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	- Manufacturer guidance Embodied carbon has not been assessed.
Recyclability	100% Guidance for specification option: Information on recycling is contained in the environmental datasheet in the technical support section of the manufacturer's website: polyfoamxps.co.uk