NBS Source
I'm a manufacturer

Application

BITUSEAL should be applied to the prepared surface, using a suitable brush, roller or airless sprayer in a minimum of 2 coats. The first coat should be applied at a rate of approximately, 0.2 litres per M2. Once the first coat is dry the second coat should be applied at right angles to the first application to ensure maximum coverage. If required then a layer of glass fibre mesh maybe embedded into the first coat, whilst still wet to provide extra reinforcement. If the BITUSEAL is to be applied to a concrete substrate which is to be subsequently overlaid with a cementitious screed, then the topcoat of BITUSEAL should be blinded with quartz aggregate to provide an adequate bond between the cured BITUSEAL and the subsequent screed.

Description

  • BITUSEAL is a bitumen emulsion. It is a solvent dispersion which exhibits excellent adhesive properties and retains its elasticity once cured. For large civil projects, it meets the requirements of a highways / civil engineering grade cutback bitumen.

General information

Color

Black

Material

Bitumen

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_68_16 Cold-applied bitumen solutionsPrimary

CAWS

J30/10 Cold-applied damp-proofing

J30/130 Cold-applied damp-proofing

J31/353 Waterproof coating

J31/5 Cold deck roof coating

Product range

Waterproofing Coatings

Specification data - Cold-applied bitumen solutions

Material

Rubber modified aqueous bitumen emulsion.

Application temperature

5–35°C.

Specific gravity

1.00.

Solids content

55%.

Guidance for specification option:

5%.

Drying time

4–6 hours.

Guidance for specification option:

Can be overcoated after 24 hours.

Literature

Bituseal TDS

Bituseal TDS

Similar products from Premcrete

Hydroprufe AC

Hydroprufe AC