Verified by manufacturer 4 months ago
BBA Agrément Certificate
Certificate type
ISO 9001 Quality Management
Certificate type
A reinforced bituminous membrane roof waterproofing system.
Proteus Pro-Felt Endura is ideal for use as a fully bonded roof waterproofing and AVCL in a warm roof waterproofing system on flat and pitched roofs with limited access. Where traffic over this is envisaged, such as pedestrian access roofs, additional protection must be provided.
Proteus Pro-Felt Endura is a roof system including a self-adhesive air and vapour control layer (AVCL) which can be safely and securely bonded to any roof deck without the use of a torch. Thermal insulation is then bonded to the AVCL, followed by a polymer-modified, self-adhesive underlay and a torch-on cap sheet.
The Proteus Pro-Felt Endura Mineral cap sheet is a torch-applied, bituminous cap sheet which is saturated and coated with SBS (Styrene-Butadiene-Styrene) modified bitumen. It has a high tensile polyester fleece reinforcement, a thermofusible polyethylene film on the underside and a slate surfaced finish. The product also incorporates a special graphite additive within the membrane to provide enhanced fire performance properties.
System components:
Features and benefits:
Color | Grey |
Finish | Mineral |
Material | Bitumen |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | 30 year |
Uniclass | |
CAWS | J41/130 Built-up reinforced bitumen membrane cold deck roof covering J41/120 Built-up reinforced bitumen membrane inverted roof covering J41/110 Built-up reinforced bitumen membrane warm deck roof covering J41/10 Reinforced bitumen membrane warm deck roof covering |
System performance | Manufacturer guidanceInsert requirements. Life expectancy in excess of 35 years, refer to BBA certificate 22/6033 - BROOF(t4) classification to EN 13501-5. |
Preparation | |
Horizontal work | Proteus Pro-Prime SA.Guidance for specification option: A synthetic rubber based primer for bonding Proteus Waterproofing’s range of self-adhesive membranes and vapour control layers to a variety of substrates. Suited for upstands and vertical applications. Proteus Pro-Prime Bitumen.Guidance for specification option: A cold applied bituminous solution designed to prime and seal porous roof surfaces before applying bituminous materials. Promotes the adhesion of bituminous waterproofing systems and sheet coverings. Suitable for concrete, asbestos cement, metals (mild steel, zinc and lead), slate, and lightweight concrete screeds. |
Skirtings and vertical work | Proteus Pro-Prime SA.Guidance for specification option: A synthetic rubber based primer for bonding Proteus Waterproofing’s range of self-adhesive membranes and vapour control layers to a variety of substrates. Suited for upstands and vertical applications. Proteus Pro-Prime Bitumen.Guidance for specification option: A cold applied bituminous solution designed to prime and seal porous roof surfaces before applying bituminous materials. Promotes the adhesion of bituminous waterproofing systems and sheet coverings. Suitable for concrete, asbestos cement, metals (mild steel, zinc and lead), slate, and lightweight concrete screeds. |
Air and vapour control layer | |
Type | Proteus Pro-Felt Endura SA AVCL Sanded.Guidance for specification option: A self-adhesive, elastomeric modified bitumen AVCL with a glass fibre/aluminium composite (200 g·m–2) acting as reinforcement. The membrane has a sand finish on the upper surface and a release film on the lower surface. Proteus Pro-Felt Endura AVCL Sanded.Guidance for specification option: A torch-on, elastomeric modified bitumen AVCL with a glass fleece/aluminium composite (60 g·m–2) acting as reinforcement. The membrane has a sand finish on the upper surface and a thermofusible polyethylene film on the lower surface. |
Attachment | Self-adhesion.Guidance for specification option: Proteus Pro-Felt Endura SA AVCL Sanded substrates, other than timber, by self-adhesion. Torch-bonding.Guidance for specification option: Proteus Pro-Felt Endura AVCL Sanded on all substrates by torch-bonding. |
Insulation | |
Type | Proteus Pro-Therm PIR.Proteus Pro-Therm HP PIR.Proteus Pro-Therm HP PIR Plus.Proteus Pro-Therm Mineral Wool.Proteus Pro-Therm Cellular Glass.Proteus Pro-Therm VIP. |
Fixing | Pro-Bond Foaming adhesive.Guidance for specification option: For warm deck roof build-ups. Compatible with the following vapour barriers and substrates: Bituminous vapour control layers, concrete decks, galvanized metal decks, mastic asphalt, oriented strand boards, plywood, proprietary vapour barriers and existing bituminous built up roofing. Compatible with the following insualtion boards: bituminous felt faced, cork insulation, cellular glass insulation, expanded polystyrene (eps), extruded polystyrene (xps), glass tissue faced, rock fibre and wood fibre. |
Waterproof covering | |
First layer | |
Type | Proteus Pro-Felt Endura SA Underlay Sanded.Guidance for specification option: A self-adhesive, elastomeric modified bitumen membrane, reinforced with glass fibre (200 g·m–2). The membrane has a sand finish on the upper surface and a release film on the lower surface. |
Attachment | Self-adhesive. |
Top layer | |
Type | Proteus Pro-Felt Endura SA Mineral and Proteus Pro-Felt Endura Mineral.Guidance for specification option: Proteus Pro-Felt Endura SA Mineral is a self-adhesive, elastomeric modified bitumen membrane, reinforced with polyester (280 g·m–2). The membrane has a slate finish on the upper surface and a release film on the lower surface. It is installed in the perimeter zone of the roof for a minimum of 900 mm from any areas of detailing. Proteus Pro-Felt Endura Mineral is a torch-on, elastomeric modified bitumen membrane, reinforced with polyester (180–200 g·m–2), with a slate finish on the upper surface and a thermofusible polyethylene film on the lower surface. |
Attachment | Self-adhesive (Proteus Pro-Felt Endura SA Mineral) and torch-on (Proteus Pro-Felt Endura Mineral). |
Detail work | |
Flashings | Proteus Pro-Felt Endura SA Underlay Sanded & Proteus Pro-Felt Endura SA Mineral.Proteus Pro-Felt Endura SA Underlay Sanded & Proteus Pro-Felt Endura Mineral. |
Skirtings and upstands | Proteus Pro-Felt Endura SA Underlay Sanded & Proteus Pro-Felt Endura SA Mineral.Proteus Pro-Felt Endura SA Underlay Sanded & Proteus Pro-Felt Endura Mineral. |
Welted drips | Proteus Pro-Felt Endura SA Mineral and Proteus Pro-Felt Endura Mineral.Guidance for specification option: Proteus Pro-Felt Endura SA Mineral is a self-adhesive, elastomeric modified bitumen membrane, reinforced with polyester (280 g·m–2). The membrane has a slate finish on the upper surface and a release film on the lower surface. It is installed in the perimeter zone of the roof for a minimum of 900 mm from any areas of detailing. Proteus Pro-Felt Endura Mineral is a torch-on, elastomeric modified bitumen membrane, reinforced with polyester (180–200 g·m–2), with a slate finish on the upper surface and a thermofusible polyethylene film on the lower surface. |
Cover strips | Proteus Pro-Felt Endura SA Mineral and Proteus Pro-Felt Endura Mineral.Guidance for specification option: Proteus Pro-Felt Endura SA Mineral is a self-adhesive, elastomeric modified bitumen membrane, reinforced with polyester (280 g·m–2). The membrane has a slate finish on the upper surface and a release film on the lower surface. It is installed in the perimeter zone of the roof for a minimum of 900 mm from any areas of detailing. Proteus Pro-Felt Endura Mineral is a torch-on, elastomeric modified bitumen membrane, reinforced with polyester (180–200 g·m–2), with a slate finish on the upper surface and a thermofusible polyethylene film on the lower surface. Manufacturer guidanceThe membranes and AVCLs can accept, without damage, the foot traffic and light concentrated loads associated with installation and maintenance. Where traffic over this is envisaged, such as for maintenance of lift equipment, a walkway must be provided (for example, using concrete slabs supported on bearing pads, or an additional sacrificial layer of capsheet). Reasonable care should be taken to avoid puncture by sharp objects or concentrated loads. |
Ancillary items | Manufacturer guidanceRefer to manufacturers guidelines for mechanical fixing detail and vertical work higher than 300 mm, and insert requirements. |
Surface protection | Manufacturer guidanceThe membranes and AVCLs can accept, without damage, the foot traffic and light concentrated loads associated with installation and maintenance. Where traffic over this is envisaged, such as for maintenance of lift equipment, a walkway must be provided (for example, using concrete slabs supported on bearing pads). Reasonable care should be taken to avoid puncture by sharp objects or concentrated loads. |
System accessories | Not required.Membrane walkways.Roof membrane perimeter trims.Termination bars.Angle fillets.Outlets.Rooflights.Manufacturer guidanceConsult manufacturer for further details. |
Execution | Manufacturer guidanceConsult manufacturer for execution requirements. |
System completion | Manufacturer guidanceThe NHBC requires that the waterproofing membranes, once installed, are inspected in accordance with NHBC Standards 2022, Chapter 7.1, Clause 7.1.12, and undergo an appropriate integrity test, where required. Any damage to the membrane is repaired in accordance with section 16 of BBA certificate 22/6033 and reinspected. |
Contains Red List materials | No |
Material | Bitumen |
Product Data Sheet - Proteus Pro-Prime® SA
Product Data Sheet - Proteus Pro-Prime® Bitumen
Product Data Sheet - Proteus Pro-Therm HP PIR
Product Data Sheet - Proteus Pro-Therm HP PIR Plus
Product Data Sheet - Proteus Pro-Therm Cellular Glass
Product Data Sheet - Proteus Pro-Felt® Endura AVCL
Product Data Sheet - Proteus Pro-Felt® Endura SA AVCL
Product Data Sheet - Proteus Pro-Felt® Endura SA Mineral
Product Data Sheet - Proteus Pro-Felt® Endura SA Underlay
Product Data Sheet - Proteus Pro-Felt® Endura Mineral