Compare

Protan UK BlueProof Adhered - BPX Membrane - Warm Roof System

Name: Protan UK BlueProof Adhered - BPX Membrane - Warm Roof System
Brand: Protan (UK) Ltd
SKU: 8GUqthXpf199WG6Wqgc3fz

Verified by manufacturer 2 months ago

Protan (UK) Ltd

Product certifications:

BBA Agrément Certificate
Certificate type

Adhered PVC single-ply membrane water attenuation blue roofing system for warm roof constructions.

Jump to:

BOS

+44 (0)1925 658001 Website

Application

Can be laid on roofs designed for slopes with a minimum 1:100 towards the outlet. Suitable for new build and refurbishment applications on flat or pitched roofs. Can be used on concrete roof decking, plywood WBP to BS 5268-2 and BS EN 636-3, profiled galvanized steel deck, roofing Grade OSB to BS EN 300 and profiled aluminium deck.

Description

Water attenuation blue roofing system for new and existing roofs that includes Protan BPX 1.8 mm thick roofing membranes manufactured from PVC with a polyester reinforced core. Installed as exposed roofing, allowing rainwater to accumulate to a predefined maximum level and be stored on the roof for a certain amount of time after rainfall. Water run-off is then gradually permitted into the into the building's drainage system before entering the drainage network. This avoids water overloading, which can result in flooding. Joint welding is carried out using hot air.

Features and benefits:

Can be laid on roofs designed for slopes with a minimum 1:100 towards the outlet.
Embossed surface provides slip resistance.
Cost effective, using the existing roof surface area.
Can be used with or without insulation.
Additional stabilizers ensure the system is resistant to temperature, UV radiation and atmospheric contamination.
Controls water pressure, which helps to reduce floods and flood damage.
Can be used on both conventional and external drains.
Designed to be fully adhered using a moisture-curing polyurethane adhesive. The adhesive should only be applied when the air temperature is above 5ºC.
SINTEF approved.
Suitable for new build and refurbishment applications on flat or pitched roofs.
Membrane is manufactured from pliable PVC reinforced with knitted polyester. The PVC contains stabilizers that provide fire resistance and make the product UV stable and resistant to both high and low temperatures. The membrane remains flexible at low temperatures during installation and use.

Substrates:

Can be used on the following:

Concrete roof decking.
Plywood WBP to BS 5268-2 and BS EN 636-3, minimum thickness 18 mm.
Profiled galvanized steel deck, minimum recommended thickness 0.7 mm to BS EN 10147 Fe E280G Z275.
Roofing Grade OSB to BS EN 300, Grade 3 and minimum thickness 18 mm.
Profiled aluminium deck minimum recommended thickness 0.9 mm. BS EN 485-1/2/3/4:1995 and BS EN 1999-1-4:2007.

Manufacturer recommends that at least one additional overflow is installed into the parapet for protection.

General information

Color	Grey Guidance for specification option: Dark grey.
Finish	Anti-slip Guidance for specification option: Embossed surface with anti-slip texture.
Material	Polyvinyl chloride (PVC) Guidance for specification option: Manufactured from polyvinyl chloride (PVC) with a core of polyester reinforcement.
Warranty description	Guidance for specification option: Inclusive system warranty available, consult manufacturer.

Uniclass	Ss_30_40_30_80 Single layer sheet warm roof covering systemsPrimary
CAWS	J42/10 Warm deck roof covering J42/110 Warm deck roof covering

Specification data - Single layer sheet warm roof covering systems

Width	2000 mm. As manufacturer's recommendations. Manufacturer guidance Waterproof covering width.
Thickness	1.8 mm.
Weight	≥2.1 kg/m² (plus fleece weight).
Foldability at low temperature (to EN 1107-2)	≤−30°C.
Dimensional stability (to EN 1107-2)	≥-0.5 and ≤0.5%.
Water tightness (to EN 1928)	Pass.
Resistance to tearing (EN 12310-2)	≥450/ 300 N.
Tensile strength (to EN 12311-2)	≥1800/ 1400 N/50 mm.
Elongation at break (to EN 12311-2)	≥15%.
Peel resistance of joints (to EN 12317-2)	≥150 N/50 mm.
Shear resistance of joints (to EN 12317-2)	≥1000 N/50 mm.
Water vapour resistance (to EN ISO 12572)	27 m.
Colour	Dark grey.

Sustainability data

Material	Polyvinyl chloride (PVC) Guidance for specification option: Manufactured from polyvinyl chloride (PVC) with a core of polyester reinforcement.