Compare

Proteus Pro-BW® Plus - Liquid Applied Membrane

Name: Proteus Pro-BW® Plus - Liquid Applied Membrane
Brand: Proteus Waterproofing
SKU: xaLv6LzTCCrCNF8H84bGZ3

Verified by manufacturer 2 days ago

Proteus Waterproofing

Third party certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type
ISO 9001 Quality Management
Certificate type

Liquid-applied roof waterproofing system for use on exposed, protected, inverted flat roofs, green roofs, blue roofs, podiums, balconies and walkways.

Jump to:

+44 (0)1268 777871 Website

Application

Suitable for:

Cold roofs, warm roofs, inverted roofs, green roofs, podium decks, walkways and balconies.
Protected built-up roof systems.
Inverted zero fall roof systems.
Exposed warm built-up roof systems.
Walkway and balcony liquid applied membrane.
Living intensive and extensive green and biodiverse roofs.
Attenuated blue roofs.

Note: A wet electronic leak test is required for all inverted/ buried systems prior to the liquid applied membrane being covered.

Suitable substrates:

Insulation.
Concrete and screeds.
WBP plywood/ timber.
Asphalt.
Bituminous felt membranes.
Single ply membranes.

Note: Some surfaces may require priming or sacrificial layers.

Description

Pro-BW® Plus is a high performance, hard wearing, fast curing, two-pack* liquid applied membrane for exposed, protected, inverted flat roofs, green roofs, blue roofs, podiums, balconies and walkways. It is designed to provide a durable, monolithic, waterproof liquid applied membrane.

Pro-BW® Plus is cold applied and suitable for refurbishment and new-build projects, reducing installation time from days to hours. Pro-BW® Plus can be installed with a slip resistant surface for pedestrian trafficable decks.

*In colder temperatures an additional accelerator is required.

When subjected to normal service conditions, Pro-BW® Plus liquid applied membrane will provide an effective waterproof barrier up to 10, 15, 20 and 25 years dependent on system.

Features and benefits:

Suitable for inverted roof, warm roof, green roof, blue roof and exposed pedestrian traffic applications (BBA certified).
BBA Certified 25 years – Certificate no. 18-5574.
Highest European fire rating BROOF(t4).
Cold installed seamless membrane – no lap-joints.
Rapid cure/installation.
Same day return to full service may be achieved.
Low/high temperature application (3°C to +30°C).
Awkward details are easily dealt with.
UV stable and colour-fast.
Resilient to crack bridging up to < 0.5 mm.
Exceptional wear and waterproofing qualities provide a durable system.
Waterproof, UV stable, seamless and resistant to diluted acids and alkalis, oil, petrol, diesel, vegetable oils and fruit acids.
Range of colours available.

General information

Material	Resin
Warranty description	25 year

Uniclass	Pr_35_31_68_52 Membrane walkway coatingsPrimary Ss_45_40_47_09 Brown roof systems Ss_30_40_30_40 Liquid-applied cold roof covering systems Ss_30_40_30_42 Liquid-applied inverted roof covering systems Ss_45_40_47_75 Semi-intensive green roof systems Ss_45_40_47_28 Extensive green roof systems Ss_45_40_47_40 Intensive green roof systems Ss_30_40_30_43 Liquid-applied warm roof covering systems
CAWS	J31/47 Waterproof coating J31/110 Cold deck roof coating J31/130 Inverted roof coating J31/120 Warm deck roof coating J31/385 Walkway protective coating J31/353 Waterproof coating J31/5 Cold deck roof coating J31/10 Warm deck roof coating J31/90 Walkway protective coating J31/12 Inverted roof coating

Specification data - Membrane walkway coatings

Composition	Manufacturer's standard.
Width	- Manufacturer guidance Insert requirements or omit.
Colour	- Manufacturer guidance Consult manufacturer and insert requirements.
Additives	None. Pro-BW® coating, anti-slip.

Cracks	Proteus Flexcrete Fastfill. Guidance for specification option: Reinforced with Pro-BW® Plus Resin and Pro-Force 450, consult manufacturer for details.
Primer	Not required. Guidance for specification option: Primer is not generally required on aged concrete or aged asphalt substrates. Cold Melt® DPM Primer. Guidance for specification option: Option for expediting prime on new concrete and screeds, less than 28 days old. Pro-BW® Primer. Guidance for specification option: Primer seal for new asphalt, existing concrete and screeds. Minimum 28 day weathering required before priming. Pro-Epoxy Primer. Guidance for specification option: Applied to all metal surfaces. Pro-Prime® SA. Guidance for specification option: Substrates to receive Pro-Vapour Control/Carrier Membrane SA.
Reinforcement	Pro-Force 450 reinforcing matting. Guidance for specification option: Embedded throughout base coat.
Skid resistance	Wet >36 PTV. Manufacturer guidance Value (TRL pendulum) to BS 8204-2:2003 (9).
TensileStrength	Unaged: 3307 N/50 mm; Heat aged: 4851 N/50 mm; UV aged: 4911 N/50 mm. Manufacturer guidance To BS EN ISO 527-3.
Elongation at break	Unaged: 3.7%; Heat aged: 2.8%; UV aged: 3.1%. Manufacturer guidance Elongation at maximum load to BS EN ISO 527-3.
UV resistance	Excellent.
Shelf life	12 months.
Chemical resistance	Dilute acids, alkalis, oil, petrol, vegetable oils and fruit acids.
Fire performance	BRoof(t4). Manufacturer guidance External fire performance.

Sustainability data

Contains Red List materials	No
Country of material origin	United Kingdom
Country of product manufacture	United Kingdom
Material	Resin
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	12.3 kg CO₂ eq/m²
Recyclability	In most cases, the Pro-BW® Plus membrane is designed to last until the building is taken down, since it can be readily retrofitted at the end of its lifespan, either with a new waterproofing solution or as a component of a thermal improvement. Upon the building's demolition, the membrane will be managed with the substrate onto which it is applied; it could therefore either be recovered for use as aggregate or disposed as mixed material.
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %