NBS Source
I'm a manufacturer

Proteus SR - A1 & A2 Aluminium Rainscreen Cladding

Verified by manufacturer 1 month ago

Proteus Facades

Proteus SR is a secret fix hook rainscreen system that is available in aluminium and steel

Jump to:
BOS
+44 (0)151 5455075 Website

Application

Can be installed on any type of wall construction.

Description

Proteus SR is an A1 or A2 metal rainscreen cladding system that is available in a multitude of materials and finishes, including Aluminium, Stainless Steel and Weathering Steel.


Proteus SR is a secret fix rainscreen system that is available in a multitude of materials and finishes, including Powder Coated Aluminium, Pre Coated Aluminium, Anodised Aluminium, Stainless Steel, Powder Coated Steel and Weathering Steel.


The versatility of the Proteus SR rainscreen system allows the material thickness to be from 1.5 mm to 5.0 mm. Designers have the freedom using the Proteus SR system to lay panels in vertical, horizontal or a combination of both orientations. Standard 20 mm vertical and horizontal joints provide a clean and effortless sightline to your facade.


The panels fix to a carrier rail with hooks at engineered centres. The hooks bolt into predesigned ports within the vertical rails rather than using self-drilling fixings, which offer maximum site adjustability and construction tolerance.


Vertical rails connect to support brackets engineered to a depth specific to your project with accompanying thermal isolator pads, allowing the system to be connected to all types of primary structures, including blockwork, precast concrete, timber frame, SIPS panels, SFS and insulated steel panels.


Secondary horizontal rails may be required, subject to the project’s framing system. This flexibility assists in reducing installation periods and offers maximum flexibility for new build, refurbishment and cladding remediation projects.


Features and benefits:

  • Proteus SR is ideal for refurbishment and replacement cladding projects.
  • Sleek and modern appearance.
  • All panels assembled at our factory are pre-finished for rapid installation.
  • Stud or spot-welded mid-span supports.
  • Material can be broken down and fully recycled.
  • Variety of insulation depths for thermal and acoustic requirements.
  • Classified A1 or A2-s1, d0 in accordance with EN13501.
  • Fully tested and compliant with CWCT standards.

General information

Finish

Anodized

Brushed

Polished

Powder-coated

Coated

Material

Aluminium

Stainless steel

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

Guidance for specification option:

Extended warranties are available.

Uniclass

Ss_25_20_70_25 Drained and back-ventilated rainscreen cladding systemsPrimary

CAWS

H92/120 Rainscreen cladding

Specification data - Drained and back-ventilated rainscreen cladding systems

System performance

Rainscreen cladding system design.

Thermal insulation

To suit u-value requirements.

Breather membrane

-

Material

-

Manufacturer guidance

If breather membrane required by insulation manufacturer, insert material.

Fasteners

-

Manufacturer guidance

If breather membrane required, insert fastener type.

Secondary support structure

Proteus extruded aluminium rail system with Standard Proteus SR® system secret fix hook brackets to rear of cladding panels, and continuous mullion section around all openings to support panel edges.

Guidance for specification option:

To suit project specific loads, spans and cladding zone depth. Contact manufacturer for standard drawings or request meeting with architectural advisor.

Cavity fire barriers

-

Horizontal

Horizontal Cavity Barriers by others.

Guidance for specification option:

As specified by a fire engineer.

Vertical

Vertical Cavity Barriers by others.

Guidance for specification option:

As specified by a fire engineer.

Cladding panels

-

Material

2.0 mm Aluminium.

3.0 mm Aluminium.

4.0 mm Aluminium.

5.0 mm Aluminium.

1.5 mm Stainless steel.

2.0 mm Stainless steel.

3.0 mm Stainless steel.

2.0 mm Weathering steel.

3.0 mm Weathering steel.

4.0 mm Weathering steel.

Panel joints

20 mm recessed closed joints to match panel face.

Guidance for specification option:

Other joint widths/types are possible, please consult manufacturer.

System accessories

Not required.

Louvres.

Louvred doors.

Secret doors.

Perforated screens.

Fins.

Other.

System completion

Maintenance and replacement

Finish

Rimex ColourTex.

Rimex Patterned.

Rimex Granex.

Rimex Metal Art.

Rimex Super Mirror.

Show more

Colour

-

Manufacturer guidance

Consult manufacturer and insert requirement.

Reaction to fire

To EN 13501-1, Class A2-s1, d0.

Guidance for specification option:

Anodised aluminium, PPC aluminium, Pre-coated aluminium, Zinc.

To EN 13501-1, Class A1.

Guidance for specification option:

Stainless steel, Weathering steel, Copper alloy, Zinc.

Samples required

None.

Finish samples.

System samples.

Mock-ups or prototypes.

Guidance for specification option:

If system requirements not fully explored and agreed prior to specifying. Identify scale and purpose of mock-up, e.g. to agree interface details with other trades, etc.

Sustainability data

Recyclability

Metal products can be broken down and recycled

Manufacturer guidance

All materials, other than adhesives, can be recycled at end of life.

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

2

IFC
-

2

Similar products from Proteus Facades

Proteus HR  - Metal Rainscreen Cladding

Proteus HR - Metal Rainscreen Cladding

Proteus SR ACM Metal (Secret Fix ACM Rainscreen System) - Drained and Back-ventilated Cladding

Proteus SR ACM Metal (Secret Fix ACM Rainscreen System) - Drained and Back-ventilated Cladding