Push And Pull Ironmongery Set, Single Door – Hardware Set PP
Verified by manufacturer 4 months ago
Door hardware set.
Application
Door hardware suitable for a wide variety of projects from residential through to commercial and education.
Description
Door hardware set, which is available in a range of finishes including: Satin SS, bronze, matt black, polish SS, satin brass.
Normal door thickness of 44 mm is assumed (Unless Indicated). Should any other door size be used certain items may have to be adjusted to accommodate this.
If master keying of locks is included in the specification, the manufacturer requires the exact details of the project keying requirements.
Kicking plate sizes are approximate. Final site sizing will be required from the contractor prior to ordering.
- Stainless steel ball bearing hinge 102 x 76 mm grade 13 with radius corners included & priced in the door schedule
- Architectural overhead door closer - power size 2 - 5 c/w back check & delayed action (compliant with DDA recommendations)
- Finger plate 350 x 85 mm with radiused corners drilled & countersunk with screws
- Pull handle 300 x 19 mm c/w bolt through fixings
General information
Color | Yellow Silver Black Bronze |
Finish | Satin Matt Polished |
Material | Stainless steel Brass Bronze |
Uniclass | |
CAWS | P21/121 Ironmongery from single proprietary range |
Specification data - Door hardware systems
Hanging | Stainless steel ball bearing hinge 102 x 76 mm grade 13 with radius corners. |
Operating | Pull handle 300 x 19 mm with bolt through fixings. |
Plates and stops | Finger plate 350 x 85 mm with radiused corners drilled and countersunk with screw. |
Finish: | Satin SS. Bronze. Matt black. Polished SS. Satin brass. |
Sustainability data
Material | Stainless steel Brass Bronze |