Verified by manufacturer 2 months ago
45 mm Core Thickness
Fire Safety Certification
Certificate type
DoP
Certificate type
EPD
Certificate type
FM Approved
Certificate type
Range of secret-fix insulated wall panels.
Horizontal and vertical applications.
Environmental:
Kingspan QuadCore:
Quality and Durability:
Kingspan insulated panels are manufactured from the highest quality materials, using state of the art production equipment to rigorous quality control standards, complying with:
Certification and Testing:
Reaction to Fire:
QuadCore AWP Wall Panel is classified B-s1,d0, when tested on the internal face of the product, according to the European Reaction to Fire classification system (Euroclasses) EN 13501-1: 2018 under the certified name AWP Product Family when using the following internal liners:
Please contact Kingspan Tech-eXchange for information relating to the external face.
Fire Resistance:
Fire resistance classifications are subject to panel thickness, orientation, method of assembly, and steel coating. Please contact Kingspan Tech-eXchange for project specific details.
Insurer Approvals:
QuadCore AWP Wall Panels are tested to LPS 1181 Part 1: Issue 1.2 Requirements and tests for builtup cladding and sandwich panel systems for use as the external envelope of buildings certified to:
FM 4880 approval standard for class 1 fire rating of building panels or interior finish materials for thicknesses:
FM 4881 approval standard for class 1 exterior wall systems for thicknesses:
FM 4882 approval standard for class 1 interior wall and ceiling materials or systems for smoke sensitive occupancies for thicknesses:
FM approvals are subject to the following certified names:
Insurer approvals are large scale testing regimes that provide objective third-party testing, which is underpinned by quarterly, bi-annual and annual factory surveillance audits (depending on the region) to verify compliance.
Insurer approvals are subject to panel thickness, cover width, orientation, method of assembly, steel coating and manufacturing facility. Please contact Kingspan Tech-eXchange for further information.
Kingspan Tech-eXchange:
Kingspan Tech-eXchange is our dedicated team supporting you during the conception, design and installation of your project using our building envelope solutions, Kingspan Tech-eXchange supports our customers using the latest modelling and design software packages.
QuadCore® Assured System Warranty:
Please contact Kingspan Tech-eXchange or refer to the ‘Quadcore Assured’ brochure for a list of accessories covered by Kingspan.
Kingspan Planet Passionate:
Planet Passionate is Kingspan’s ambitious 10 year global sustainability programme which aims to impact three big global issues :
By setting ourselves challenging targets in the areas of energy, carbon, circularity and water, we aim to make significant advances in the sustainability of both our business operations and our products.
Material | Steel |
Shape | Rectangle |
Length | Bespoke |
Width | 1000 mm |
Height | 45 mm 54 mm 60 mm 70 mm 74 mm Manufacturer guidanceCore thickness. |
Warranty description | 25 year Guidance for specification option:
30 year Guidance for specification option: Up to 30 year coating performance. Manufacturer guidanceQuadCore® Assured Panel Warranty. |
Uniclass | |
CAWS | H43/120 Metal insulating sandwich panel H43/10 Metal insulating sandwich panel |
Product range |
Standard | To BS EN 14509. |
Panels | Self-supporting double skin metal faced insulating panels. Factory made products. |
Panel construction | |
Panel external face | |
Material | Steel. |
Grade | S280GD. |
Profile | Convex (CX).Euro-Box (EB).Flat (FL).Flat Stucco (FL-S).Micro-Rib (MR).Mini-Micro (MM).Plank (PL).Tramline (TL).Wave (WV). |
Panel internal face | |
Material | Steel. |
Grade | S220GD. |
Profile | Ribbed. |
Core insulation | QuadCore, 45 mm.Manufacturer guidanceQuadCore AWP Wall Panels are manufactured with an HCFC, CFC and HFC free QuadCore insulation core. |
Panel dimensions | |
Length | Manufacturer guidanceStandard lengths: 1.8-14.5 m. Longer lengths (non-standard): 14.5–17.5 m. Shorter lengths (non-standard): Below 1.8 m. Note: Additional costs and transport restrictions may apply for non-standard lengths. All lengths may change for export (outside of the UK & Ireland). |
Cover width | 1000 mm. |
Thickness | 45 mm. |
Joint type | |
Side or vertical | Male and female connections.Guidance for specification option: Factory applied weather seal set in rebate. Please contact Kingspan Tech-eXchange for further information |
End or horizontal | Butt joint.Guidance for specification option: Mechanically fixed top hat section extrusion and cover. Kingspan AWP filler and non-setting gun-grade site applied at the end of each panel where flashings pass over the joint. Bridging seal across panel joint in line with AWP filler and internal air seal to be non-setting gun-grade. VJ2 EPDM bubble gasket applied to vertical support at joint location. Please contact Kingspan Tech-eXchange for further information. |
Taper | Manufacturer guidancePlease contact Kingspan Tech-eXchange for further information. |
Finish as delivered | |
Outer skin | |
Material | PUR.Guidance for specification option: Kingspan Spectrum: Consists of a coated semigloss finish with slight granular effect. |
Thickness | 55 μm.Guidance for specification option: Kingspan Spectrum. |
Colour | Adventura.Basalt.Beigestone.Carnelia.Citrine.Goldstone.Greenrock.Greyrock.Jet.Kyanite.Lazuli.Lolite.Moonstone.Obsidian.Onyx.Opal.Pearl.Silver.Topaz.Zircon.Manufacturer guidanceKingspan Spectrum:
|
Inner skin | |
Material | SP.Guidance for specification option: CLEANsafe 15: The coating has been developed for use as the internal lining of insulated panels. Standard colour is “bright white” with an easily cleaned surface. PVC(F).Guidance for specification option: Kingspan CLEANsafe 120: The coating has been developed for use as the internal lining of insulated panels where a high level of cleanliness and hygiene is required, and the panels are to be cleaned down on a regular basis. PUR.Guidance for specification option: AQUAsafe 55: The coating has been developed for use as the internal lining of insulated panels for swimming pools and other high humidity internal environments. |
Thickness | 15 μm.Guidance for specification option: CLEANsafe 15. 120 μm.Guidance for specification option: CLEANsafe 120. 55 μm.Guidance for specification option: AQUAsafe 55. |
Colour | Bright white. |
Integral accessories | Self-drilling, self-tapping stainless steel primary fasteners with non-ferrous EPDM backed washer.Stainless steel secondary fasteners with non-ferrous EPDM backed washer.Butyl tape sealants.Non-setting butyl sealant.Silicone sealant.Top hat.Top hat insert.EPDM bubble gasket.Manufacturer guidancePlease contact Kingspan Tech-eXchange for further information |
Special features | Manufacturer guidancePlease contact Kingspan Tech-eXchange for further information. |
Fire performance | |
Reaction to fire | |
Core | Manufacturer guidancePlease contact Kingspan Tech-eXchange for further information. |
Panel external face | Manufacturer guidancePlease contact Kingspan Tech-eXchange for further information. |
Panel internal face | To BS EN 13501–1, Class B-s1, d0.Guidance for specification option: Please contact Kingspan Tech-eXchange for further information. |
Fire resistance | Manufacturer guidanceFire resistance classifications are subject to panel thickness, orientation, method of assembly, and steel coating. Please contact Kingspan Tech-eXchange for project specific details. |
U-value | 0.46 W/m²·K. Manufacturer guidanceQuadCore AWP Wall Panel has a Thermal Transmittance (U-Value), calculated using the method required by the Building Regulations Part L2 (England & Wales), Building Standards Section 6 (Scotland), Part L (Republic of Ireland) and Part F2 (Northern Ireland). |
Weight | 8.7 kg/m². |
Global warming potential (GWP) | 26.2 kg CO₂ eq/m². |
Material | Steel |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 38.5 kg CO₂ eq/m² Guidance for specification option: Maximum (based on thickest panel). |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 2 | |
- | 2 |