Compare

RDS Original PAS68 HVM Security Fencing

Name: RDS Original PAS68 HVM Security Fencing
Brand: Zaun Limited
SKU: uK3U3P7aVTxYK7TChQzMaM

Verified by manufacturer 3 months ago

Rapid deploy temporary crash fence system, tested to PAS 68.

Jump to:

Application

Provides protection against external threats to:

Can be used to create a permanent fence line in areas where below ground foundations are not possible.

Rapid deploy temporary crash fence system, tested to PAS 68 for hostile vehicle mitigation (HVM). On a concrete base with cable system.

Features and benefits:

Requires no pinning or digging into the ground.
Allows for changes in direction and differing ground conditions - can be used in hard and soft ground standings.
Single fence line with hostile vehicle mitigation PAS 68 enhancement.
Rapidly deployable, and can be erected and removed within minutes.
Minimal disruption during installation and removal.
Highly secure compared to other temporary fencing systems.
High visibility.
CCTV cameras, Perimeter Intrusion Detection Systems (PIDs), topping enhancements and crash gates can be incorporated.
Visually appealing.
Mob and crowd tested for use in areas of mass population.
Crash tested to stop 2.5 t and 7.5 t vehicles, meeting ratings of V2500(N1G)/48/90:4.7/0.0 and V7500(N2)/48/90:11.6/0.0 - consult manufacturer for information.

Finish	Galvanized Powder coated
Material	Metal
Size	3000 x 2900 mm Guidance for specification option: Max.

CAWS	Q40/126 Open mesh steel panel security fencing Q40/27 Open mesh steel panel general purpose fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing

Posts	70 x 70 mm rectangular hollow section (RHS) posts.
Panel/ mesh type	HiSec 358 mesh. Guidance for specification option: 76.2 x 12.7 mm pattern with 4 mm vertical and horizontal wires. Others are available - consult manufacturer for information.
Colour	Guidance for specification option: Insert RAL colour requirement.
Accessories/ Other requirements	Not required. CCTV cameras. Perimeter Intrusion Detection Systems (PIDs). Topping enhancements. Manufacturer guidance Additional pedestrian access portals with PAS 68 rating and CCTV and PID systems also available, using carefully selected system technologies. Consult manufacturer and insert requirements.
Height	1800—3000 mm. Manufacturer guidance Consult manufacturer and insert requirements.
Gates	- Manufacturer guidance A range are available. Can be designed and manufactured with matching mesh.
Post centres	2750 mm.
Base size (l x w x h)	900 x 450 x 800 mm. Manufacturer guidance Concrete base size.
Panel fixings	Panels fixed to posts with full height 40 mm x 5 mm clamp bar, with through bolt fixings at 400 mm centres.
Weight	750 kg. Manufacturer guidance Concrete base weight.
Type	Required. Guidance for specification option: Crash fence gates. Not required.
Size	- Manufacturer guidance Consult manufacturer and insert requirements.
Applied finish	Galvanized and polyester powder-coated (PPC). Guidance for specification option: Insert RAL colour requirement.
Standards	To BS1722, ISO 12944.
Width	2900 mm.