NBS Source
I'm a manufacturer
Compare variants

Retractapost - Galvanised Round

Verified by manufacturer 6 months ago

138 130 372

AUTOPA Limited Variant:

Retractable parking posts.

Jump to:
+44 (0)1788 550556 Website

Application

Suitable for protecting vehicle forecourts, commercial premises, car parks and domestic driveways.

Preventing unwanted vehicle access

Description

The RetractaPost is a simple, cost effective, yet highly effective way to prevent unwanted vehicle access.


Features and benefits:

  • The RetractaPost is raised and lowered vertically. When lowered the post is fully below ground and covered using the integral lid.
  • The post is padlockable (padlock not supplied) in the raised position by first rotating the post 45° and then attaching the padlock between the post to the lid.
  • The RetractaPost 500 is 500 mm above ground in the raised position.
  • The RetractaPost 745 is 745 mm above ground in the raised position.
  • The RetractaPost 745 FB is 745 mm above ground in the raised position.


Installation:

  • It is recommended that posts are placed no further than 1200 mm apart to ensure no vehicle may pass between the raised posts.
  • An excavated hole of approximately 900 mm deep (1200 mm deep for RetractaPost 745 and 745 FB) and 300 mm diameter is required for installation.
  • Provision for suitable drainage must be made (chippings or similar) at the bottom of the hole. The uppermost 3-400 mm must be concrete.
  • The lid of the post should be no more than 10 mm above finished ground level.


General information

Color

Black

Guidance for specification option:

RAL9005

Yellow

Guidance for specification option:

RAL1021

Other

Guidance for specification option:

(RAL/BS numbers must be specified at time of order).

Finish

Galvanized

Coated

Guidance for specification option:

(RAL/BS numbers must be specified at time of order).

Powder-coated

Guidance for specification option:

(RAL/BS numbers must be specified at time of order).

Material

Steel

Height

500 mm

745 mm

Manufacturer guidance

(Above ground).

Warranty description

One year

Guidance for specification option:

This product is guaranteed for 12 months (if installed and used correctly).

Uniclass

Pr_20_76_08_11 Carbon steel hinged bollardsPrimary

CAWS

Q50/31 Bollards

Q41/200 Collapsible car park posts

Q50/190 Bollards

Q50/192 Collapsible/ Telescopic bollards

Specification data - Carbon steel hinged bollards

Dimensions

-

Size and profile

500 x 60 mm.

Manufacturer guidance

Height (above ground) x diameter.

Height

500 mm.

Manufacturer guidance

Above ground.

Post base

Hinged.

Finishes

-

Applied finish

Galvanized.

Colour.

Guidance for specification option:

Consult manufacturer for details and insert requirements.

Colour

Black.

Yellow.

Other.

Guidance for specification option:

Consult manufacturer and insert requirements.

Accessories

Not required.

138 100 907 - 40 mm Brass Padlock with 2 keys.

138 150 325 - Hardened Sliding Bolt Padlock with 2 keys.

Type

Galvanized.

Weight

12.6 kg.

OperatingWeight

3.3 kg.

Manufacturer guidance

Lift-up weight.

Depth

760 mm.

Manufacturer guidance

Below ground.

Standards

To ISO 9001, ISO 14001 and OHSAS 18001.

Sustainability data

Country of product manufacture

United Kingdom

Similar products from AUTOPA Limited

Hinged TOPLOK Parking Post

Hinged TOPLOK Parking Post

Retractapost - Galvanised Square

Retractapost - Galvanised Square

Retractapost-GL - Galvanised Round

Retractapost-GL - Galvanised Round

Retractapost-GL - Galvanised Square

Retractapost-GL - Galvanised Square

Retractapost-GL Lift Assist - Galvanised

Retractapost-GL Lift Assist - Galvanised

RGP Key Locking - Galvanised

RGP Key Locking - Galvanised

RPP

RPP