ROOFTRAK® CRS - Cladding Rail System

Guidance for specification option:

CRS-CR Cladding Rail:

• Main component in the system and is normally installed perpendicular to the direction of the cladding.
• The rail can be cantilevered off the fixing points and the trimming rail and verge trimmer can be used to provide support or intermediate fixing between the cladding rails where required.

CRS-RJ Rail Joiner:

• Connects lengths of cladding rail together.
• Positioned at any point along the length of the rail including in the span between fixing points.
• Helps to maximize use of the cladding rail which is cut and joined as necessary

CRS-TR Trimming Rail:

• Used within the perimeter of the area to be clad to provide intermediate supports where required.
• Typically at change of pitch or around windows and openings.
• Fixed into the flange of the cladding rail and aligns with the top face to provide a flush surface for supporting the cladding material.

CRS-VT Verge Trimmer:

• Designed to sit between the cladding rails to provide support along the perimeter of the area to be clad where required.
• The top face is level with the top of the cladding rail providing a flush finish for the cladding material to be fixed to.

CRS-AP Angle Profile:

• Supplied pre-folded to a specific angle and can be used to connect cladding together at a change of pitch or between different planes.
• Provides a continuous edge to which the cladding can be fixed helping to keep the building lines crisp and clean.