Compare

ROOFTRAK® IFP-MW - Roof Integrated Fixing System

Name: ROOFTRAK® IFP-MW - Roof Integrated Fixing System
Brand: Nicholson STS Ltd
SKU: gByoX4N51Z7gioA8UJJjxg

Verified by manufacturer 12 days ago

ROOFTRAK® IFP-MW integrated fixing point system for concrete, timber and trapezoidal roof deck constructions with mineral wool or compressible insulation layer.

Jump to:

+44 (0) 1763 295828 Website

Application

Typical uses include:

Solar panel installations (photovoltaic and thermal).
Signage supports.
Roof plant supports.

Suitable for use with the following roof construction types:

Concrete.
Timber.
Trapezoidal.
Roofs weathered with single ply or bituminous membranes and insulated with mineral wool or compressible insulation.

Description

ROOFTRAK® IFP-MW thermally broken, pre-insulated integrated fixing point system for concrete, timber and trapezoidal roof deck constructions with mineral wool or compressible insulation layer.

Features and benefits:

Designed for use with mineral wool or compressible insulation roof constructions. Loads imposed on the fixing point are directly transferred back to the structure instead of through the insulation layer.
The IFP-MW comprises a steel fixing plate with an internally insulated upstand post, incorporating a pre-sealed membrane flange and connection point to the top of the post. An M10 threaded receptor is then available to mount and secure services as necessary.
Thermally broken construction to limit thermal transfer.

General information

Color	Silver Grey
Finish	Powder-coated
Material	Stainless steel Steel Polyisocyanurate (PIR) High density polyethylene (HDPE) Mineral wool
Length	250 mm Guidance for specification option: Fixing plate. Flange: 400 mm.
Width	250 mm Guidance for specification option: Fixing plate. Flange: 400 mm.
Height	Bespoke
Warranty description	Ten year Guidance for specification option: Warranty Rooftrak IFP products are covered by the Nicholson standard warranty - available on the website or by request. Rooftrak IFP components are always supplied as a factory assembled product. Tampering with, or adjustment of the factory finished unit will invalidate the warranty.

Uniclass	Pr_80_77_27_72 Roof anchors for solar modulesPrimary
CAWS	E42/330 Anchor bolts H51/580 Fixing H40/770 Fixing C41/665 Lateral restraint straps C41/665 Lateral restraint straps E60/80 Lateral restraint straps E60/340 Lateral restraint straps

Specification data - Roof anchors for solar modules

Material	304 stainless steel, machined finish. Guidance for specification option: Standard. 316 stainless steel, machined finish. Guidance for specification option: For marine environments. Mild steel. Guidance for specification option: Optional, consult manufacturer for details. Manufacturer guidance Anchor point material.
Anchor type	Integrated fixing point (IFP), suitable for use on concrete and timber roofs with mineral wool or compressible insulation.
Recycled content As defined in clause 7.8 of BS EN ISO 14021	50%.

Flange	400 x 400 mm single ply or bituminous membrane.
Accessories	Not required. M10 threaded receptor. Guidance for specification option: To mount and secure services as necessary. M10 bolt. Guidance for specification option: An M10 bolt of a suitable length can be used to secure framework to the unit. The bolts should be installed with a suitable thread locking adhesive or locking washer to stop potential loosening over time. M10 bolts to the top of the unit should be tightened to 57.3 Nm. See installation instructions for this product for further details.
Fixing plate	250 x 250 x 6 mm. Manufacturer guidance Mild steel, powder-coated.
Load	Manufacturer's standard. Manufacturer guidance Compressive, shear and tensile loads vary with roof construction; consult manufacturer's literature for further information.
Insulation	Polyisocyanurate (PIR). Mineral wool.
Thermal break	High density polyethylene (HDPE).
Upstand	- Manufacturer guidance Height to suit insulation depth, consult manufacturer for details.

Sustainability data

Contains Red List materials	No
Country of material origin	United Kingdom
Country of product manufacture	United Kingdom
Material	Stainless steel Steel Polyisocyanurate (PIR) High density polyethylene (HDPE) Mineral wool
Recycled content As defined in clause 7.8 of BS EN ISO 14021	50 %
Expected Life	30 year