Compare

SF52 Sloped Glazing Curtain Wall System

Name: SF52 Sloped Glazing Curtain Wall System
Brand: Senior Architectural Systems Ltd
SKU: 6NdSHQkGbViuZaZ12SX6ou

Verified by manufacturer 3 months ago

Senior Architectural Systems Ltd

Third party certifications:

UKAS
Certificate type

Curtain wall system with enhanced thermal performance.

Jump to:

BOS

+44 (0)1709 772600 Website

Application

Curtain wall applications.

Description

A curtain wall system which has been designed to enhance thermal performance meaning the system can exceed current building regulations. It is a stick type front loaded system using spring pins and a specially designed cleat which allows square cutting throughout.

The system can be either zone drained (via conventional pressure plate drainage or using a specially designed spout system) or it can be mullion drained.

The zone drained system can be assembled capped, uncapped (using the SAS toggles) or combination of the two.

Section sizes vary from 50—250 mm (50, 80, 100, 125, 150, 175, 200, 225 and 250 mm). Specific profiles can be incorporated offering design flexibility.

Material:

Aluminium alloy 6060, 6063 or 6083 (for improved strength). T6 to BS EN 755-9 or BS EN 12020-2.
Thermal breaks are extruded to BS 7619.
Gaskets are manufactured in accordance with BS 3734.

Performance:

Tested to CWCT specification sequence B and in accordance with BS EN 13830:

Air permeability: 600 Pa.
Water tightness: 600 Pa.
Wind resistance: 2400 Pa.

General information

Color	Other
Finish	Anodized Powder-coated
Material	Aluminium
Shape	Other
Length	Bespoke
Width	Bespoke
Height	Bespoke

Uniclass	Ss_25_10_20_85 Stick curtain walling systemsPrimary
CAWS	H11/110 Curtain walling

Product range	SF52 curtain wall systems

Specification data - Stick curtain walling systems

Framing	-
Frame members	SF050. SF080. SF100. SF125. SF150. SF175. SF200. SF225. SF250. As drawing. Guidance for specification option: Insert details.
Frame accessories	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Fasteners	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Cladding units	-
Glass units	Insulated glass units (IGUs). Guidance for specification option: Insert required thickness. Manufacturer guidance Glazing: 22–50 mm thick glazing available. Consult with Senior Aluminium Systems for recommendations and details. All glazing complies with BS 6262 and ground floor glazing will comply with Secure By Design (inner pane to be a minimum of 6.8 mm laminated). Mullions: Mullion size dependent on wind load, mullion centres and tie back positions. Transom size subject to span and glass weight and in-conjunction with architectural design.
Glazing accessories	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Fasteners	Guidance for specification option: Consult manufacturer and insert requirements or omit.
Perimeter seals	Guidance for specification option: Consult manufacturer and insert requirements or omit.
System accessories	Aluminium/ co extruded plastic pressure plate, fixed to mullions and transoms at a maximum of 25 mm from ends and at a maximum of 150 centres.

Air permeability	600 Pa.
Watertightness	600 Pa.
Wind resistance	2400 Pa.
Vertical	SF272 rafter and purlin Cap. SCW002 17 mm cap.
Horizontal	SF272 rafter and purlin cap.
Finish	Anodized. Guidance for specification option: Insert colour requirements. Polyester powder coated, RAL. Guidance for specification option: Insert colour requirements. Standard RAL range available. Manufacturer guidance Typically available in three finishes: Polyester powder coating to BS EN 12206-1. Painted in-house, the surface finish is 40 microns as standard, or enhanced to 60 microns for marine environments. Anodized finish to BS 3897 to a minimum of 25 microns (AA25), available in a limited range of colours. Mill finish.