NBS Source
I'm a manufacturer

ShieldTEC Inverted Roof Hotmelt Waterproofing System

Verified by manufacturer over a year ago

Shield Membranes Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • ISO 14001 Environmental Management Systems

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

Fully-bonded bitumen-based hot melt waterproofing membrane system for inverted roofs.

Jump to:
+44 (0)20 77409279 Website

Application

ShieldTEC provides a tough, flexible, non-tracking, self-sealing waterproof membrane for use on inverted, warm, cold, hybrid, blue and living flat roofs and podium areas. ShieldTEC is also suitable for use as a damp-proof membrane in solid concrete floors or as the waterproofing layer above or below ground in concrete, brick or blockwork structures. 

Description

ShieldTEC hot melt waterproofing system is a specially formulated combination of high quality bitumen, synthetic rubbers, lightweight fillers and other additives, which is hot-applied with carefully selected reinforcement fabrics and protection layers to give a monolithic waterproofing system.


Components:

  • ShieldPRIME - A brush or roller applied bituminous priming solution for the preparation of cementitious surfaces to receive ShieldTEC monolithic membrane.
  • ShieldTEC Monolithic Hot Melt - A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives.
  • ShieldFLEECE - A non-woven polyester reinforcement fleece with a nominal weight of 50 g/m² which is embedded between the two layers of ShieldTEC compound.
  • ShieldTEC PS2 - Sanded roof access layer, ShieldTEC PS4 - Underlay or ShieldTEC PS5 - Mineral cap sheet or ShieldROOT M - Root-resistant protection membrane.


Features and benefits:

  • Hot applied system.
  • Suitable for completely flat (zero falls) decks.
  • BBA Certified No. 17/5459.
  • Outstanding durability – lasts the life of the building. Nominal system thickness of 10 mm.
  • Tough and resistant to impact damage.
  • High bond strength to substrate - High tensile strength.
  • Monolithic application.
  • Rapid setting – resistant to rain, snow and frost immediately after application.
  • Fully bonded system – Non-tracking.

General information

Color

Yellow

Guidance for specification option:

PS2 finish (yellow/ sand). Additional UV protection required.

Black

Guidance for specification option:

PS4 finish. Additional UV protection required.

Grey

Guidance for specification option:

PS5 finish (charcoal).

Finish

Film

Sanded

Manufacturer guidance

Slate mineral (ShieldROOT M).

Sanded (PS2)

Smooth film (PS4)

Material

Bitumen

Shape

Rectangle

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Other

Manufacturer guidance

Up to 40 years.

Uniclass

Ss_30_40_30_71 Reinforced bitumen membrane inverted roof covering systemsPrimary

CAWS

J41/120 Built-up reinforced bitumen membrane inverted roof covering

Specification data - Reinforced bitumen membrane inverted roof covering systems

System performance

The system will resist the passage of moisture into the interior of a building and so will enable a roof to comply with relevant requirements of the national Building Regulations

Preparation

-

Horizontal work

ShieldPRIME.

Skirtings and vertical work

ShieldPRIME.

Waterproof covering

-

First layer

-

Type

ShieldTEC Monolithic Hot Melt with ShieldFLEECE reinforcement.

Guidance for specification option:

Hot-applied in two layers to provide a waterproofing membrane with a nominal coating thickness of 6 mm. A non-woven polyester reinforcement fleece with a nominal weight of 50 g/m² is embedded between the two layers.

Top layer

-

Type

ShieldTEC PS2.

Guidance for specification option:

VCL, 2 kg/m².

Yellow/ sand in colour. Additional UV protection required.

ShieldTEC PS4.

Guidance for specification option:

Underlay, 4 kg/m².

Black in colour. Additional UV protection required.

ShieldTEC PS5 .

Guidance for specification option:

Mineral cap sheet, 5 kg/m².

Charcoal in colour.

ShieldROOT M.

Guidance for specification option:

Root resistant protection membrane.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

20 %

Guidance for specification option:

Maximum (5–20%).

Third party certifications

Third party certifications

BBA Agrément Certificate

17/5459 ShieldTEC Inverted Hotmelt System

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management System

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001 Quality Management System

Literature

ShieldTEC Hot melt Waterproofing System

ShieldTEC Hot melt Waterproofing System