NBS Source
I'm a manufacturer

Siderise FIP High Performance Acoustic Panel

Verified by manufacturer 5 months ago

Siderise Group

Siderise FIP is a high performance acoustic panel solution used where an internal partition abuts a curtain wall or window mullion, acoustic performance 46 dB Rw and up to 1 hour fire performance.

Jump to:
BOS
+44 (0)1656 730833 Website

Application

For use where an internal partition abuts a curtain wall or window mullion. Suitable for hotels, residential, government, and commercial buildings.

Description

Siderise FIP high performance acoustic panel is a bonded composite material comprising four primary layers which are bonded together to offer a combination of stiffness and damping within a high mass panel, with a nominal thickness of only 31 mm.

The layers include a high mass cementitious board either side of a central heavy elastomeric core. A unique bonding technique is used to ensure that the finished composite is heavily damped, resulting in a product with good performance at lower frequencies (stiffness and dampening controlled regions) and no ‘drop-off’ due to coincidence dip.


Features and benefits:

  • Innovative engineered solution to common noise control problem.
  • Fully tested acoustic performance.
  • Maintains high ‘room-to-room’ separation.
  • Improved reduction of noise pollution in adjoining areas.
  • Very thin construction maintains ‘clean lines’ and minimizes obscuration of glazed areas.
  • Simple to detail and easy to install.
  • Up to 1 hour fire resistance.

General information

Color

Grey

Beige

Finish

Unfinished

Sanded

Shape

Rectangle

Length

2400 mm

Manufacturer guidance

For large quantities a 2800mm length option is available. The maximum size available is, therefore, 2400mm x 600mm (standard) or 2800mm x 600mm (large project quantities).

Width

Bespoke

Manufacturer guidance

100-600mm

Height

31 mm

Uniclass

Pr_35_90_43_60 Panel partition closer piecesPrimary

CAWS

K10/115 Metal stud partition system

K10/125 Metal stud partition system

K10/15 Lining on timber

K10/30 Metal stud

Product range

Specialist Applications/Building Interiors

Specification data - Panel partition closer pieces

Material

Cementitious boards, elastomeric core.

Finish

Unfinished.

Guidance for specification option:

As standard, SIDERISE FIP is supplied unfinished to be separately clad with a thin covering (e.g. decorative laminate or coated metal plate). Normally a decorative covering is applied to both sides.

Sanded.

Guidance for specification option:

Can be supplied in a pre-sanded form for direct decoration on site.

Size

2400 x 600 x 31 mm.

Guidance for specification option:

Standard size (maximum). The product is manufactured to order, in widths 100–600 mm.

Fire performance

To BS EN 1363-1; BS EN 1366-4.

Guidance for specification option:

  • FIP up to 300 mm wide, no horizontal butt joint – 60 minutes' Integrity(E) and 60 minutes Insulation(I).
  • FIP up to 300 mm wide, with horizontal butt joints – 30 minutes' Integrity(E) and 30 minutes Insulation(I).


Higher performance ratings may be possible from formal assessment of specific project details and construction materials.

Acoustic performance

Rw (C;Ctr) = 46 dB (-2;-7).

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
IFC

IFC2X3

2

Revit

Revit 2016

3

Literature

Siderise FIP high performance acoustic panel for facade interface v5.0

Siderise FIP high performance acoustic panel for facade interface v5.0

Siderise acoustic insulation solutions for interiors

Siderise acoustic insulation solutions for interiors

Fitting guidance for the Siderise FIP system

Fitting guidance for the Siderise FIP system