Single Component Cold Applied Liquid System for Inverted Roofs - IKO hybritech 1K PU - Waterproofing system

IKOpro Bonding Agent.

Guidance for specification option:

IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C.

IKOpro Sprayfast MPP.

Guidance for specification option:

KOpro Sprayfast MPP (Black, Multipurpose Primer) is a

specially formulated high performance bonding primer.

It allows the speed of application of the bonding primer

to be five times faster than conventional bitumen primers,

promoting strong bonds at temperatures as low as

5°C. For self adhesive and torch applied bitumen membranes.

IKOpro Quick Dry Primer.

Guidance for specification option:

IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes.

Hybritech Bitumen Primer.

Guidance for specification option:

IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. 

IKOpro Bonding Agent.

Guidance for specification option:

for self adhesive bitumen membranes only.

IKOpro Sprayfast MPP.

Guidance for specification option:

for self adhesive and torch applied bitumen membranes.

IKOpro Quick Dry Primer.

Guidance for specification option:

for torch applied bitumen membranes.

Hybritech Bitumen Primer.

Guidance for specification option:

IKO hybritech Bitumen Primer is a white single-component water based primer with excellent penetration properties. 

Guidance for specification option:

IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m.

IKO hybritech waterproofing.

Guidance for specification option:

IKO hybritech is a isocyanate free, solvent free and odour free single component coating based on flexible hybrid polymers. IKO hybritech cures through reaction with the air humidity.

IKO Protection Fleece.

Guidance for specification option:

A reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the wet first layer of IKO metatech Detail and pressed in areas that are subject to heavy footfall. It therefore ensures the strength, stability and longevity of the system.

IKO 110 sgm Polyester Fleece.

IKO enertherm XPS insulation, 600 x 1250 mm.

Guidance for specification option:

IKO enertherm XPS is a light orange rigid extruded polystyrene (XPS) board with a Global Warming Potential (GWP) of less than five. A lightweight, lap jointed board with high compressive strength and performance. Thermal performance of an inverted roof is improved when used in conjunction with IKO enertherm WCL. Used for the thermal insulation of a wide variety of flat roofs including an inverted roof below ballast or paving slabs or a green/garden roof. BBA certified 17/5467. Thickness: 50, 70, 100, 130, 160, 180, 200, 220 mm available, consult literature and insert requirements.

IKO enertherm WCL (Water control layer).

IKO Paving supports and 50 mm paving.

50 mm ballast.