Verified by manufacturer 11 months ago
Prefabricated vanity unit top.
Fabricated solid surface vanity top with standard downstand of 100 mm.
Features and benefits:
Material | High pressure laminate |
Uniclass | |
CAWS | N10/145 Vanity and washroom furniture N13/341 Vanity tops with formed washbasins N13/30 Washbasins |
Materials | |
Tops | |
Body | 12 mm-thick solid surface material bonded to a 25 mm moisture-resistant chipboard ladder frame substrate, assembled to form the profile of the slab top. Top is supported either by stainless steel cantilever arms, or where a vanity base has been specified, the base provides the support. Cut-outs for the wash-hand basins, if required, are undertaken on-site, to allow flexibility/ tolerance. Additional cut-outs for other accessories are possible. Plant-on or coved upstand can be supplied in a matching finish. |
Finish and colour | 12 mm solid surface |
Framework | Full aluminium frame, factory-assembled using extruded vertical posts and horizontal cross-rails, manufactured to suit the dimensions of the top and supported by zinc-plated carbon steel adjustable feet. Frame locates into floor channel and is secured to the walls with aluminium angle. Additional angle is provided to support the top at the back and side walls. The infills form an integral part of the framework, consisting of vertical infills and skirting, creating required shadow gaps/ clearances to the vertical edge of the panels and at the floor. Standard infills are 17 mm finished thickness, consisting of 15 mm moisture-resistant MDF core and faced with high pressure laminate with balancing backing laminate. WBP plywood can be supplied as skirting to accept finishes by others, such as tiling/ vinyl. |
Base unit | Not required. A pre-fabricated hinged access panel module, fitted behind the downstand, to the underside of vanity top, providing full support. Overall depth from the rear of the framework to the front face of panel is 82 mm. |
Access panel | Particleboard. MDF. Manufacturer guidance17 mm finished thickness consisting of a 15 mm moisture-resistant particleboard/ MDF core. Where vertical edges are square, the panels are edged first and then faced with high-pressure laminate, with balancing backing laminate. Alternatively, vertical edges can be post-formed. Panels are factory-fitted to framework, using adjustable zinc alloy die-cast hinges and fastened using zinc alloy die-cast locating catches. Panel accessed using supplied injection-moulded key. |
Finish: | High Pressure Laminate. |
Colour: | Manufacturer guidanceInsert requirements from manufacturer's standard range. |
Product Reference | Slab Vanity Solid Surface |