Verified by manufacturer 5 months ago
ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
EPD
Certificate type
A rigid Impact Noise and Thermal Insulation panel designed to be tiled on.
It provides Impact Sound and Thermal insulation to wooden and concrete floors allowing them to be tiled without causing noise pollution in the room below.
It is a foam-cored, cement covered waterproof tile backer boards for floors providing decoupling and thermal insulation. This version is made specifically for floors above other living spaces such as in apartments and hotels to enable the floors to be tiled because it has an additional rubber layer which stops impact sound (footfall noise) on a tiled floor being heard in the room or flat underneath.
Features and benefits:
The SoundBoard will remove the solid link between where the impact sound happens (floor/ ceiling) with a layer of styrene-butadiene rubber (SBR) foam. The side with the sound attenuating layer will then effectively isolate the tiles and the tile backer board from the floor, so the impact sound vibrations cannot be transmitted into the room below.
Material | Rubber High density extruded polystyrene (XPS) |
Shape | Rectangle |
Length | 1250 mm |
Width | 600 mm |
Height | 8 mm |
Warranty description | Lifetime |
Uniclass | |
CAWS | M40/27 Intermediate substrate M40/470 Intermediate substrate |
Product range |
Third party product certification | BBA Certificate: 09/4687. |
Compressive strength (minimum) at 10% compression | 300 kPa. |
Thermal conductivity (maximum) | 0.04 W/m·K. |
Thickness | 8 mm.Guidance for specification option: 4.5 kg. 12 mm.Guidance for specification option: 4.9 kg. Provides extra thermal insulation. |
Face size (length x width) | 600 x 1250 mm. |
Product Reference | SoundBoard |
Weighted reduction in impact sound (on tiled surface) | 20 dB. |
Thermal resistance (R-value) | 8 mm board: 0.19 m²K/W. 12 mm board: 0.30 m²K/W. |
Contains Red List materials | No |
Country of material origin | Egypt |
Country of product manufacture | Egypt |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 10 % |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 1 | |
- | 1 |