NBS Source
I'm a manufacturer
Compare variants

SPW600e Overswing Window

Verified by manufacturer 21 days ago

SPW600e Overswing Window System [Wall Placement]

Senior Architectural Systems Ltd Variant:
Third party certifications:
  • UKAS

    UKAS

    Certificate type

A three chamber aluminium, 75 mm polyamide overswing window system that achieves impressive thermal performance.

Jump to:
BOS
+44 (0)1709 772600 Website

Application

Suitable for educational, commercial and retail applications, transport terminals, health service buildings.

Description

Three chamber 75 mm polyamide window system which achieved good thermal performance. An enhancement to the SPW 600 Suite of windows which introduces a polystyrene strip in the thermal break cavity alongside a backer rod situated around the insulated glazed unit (IGU) ensure the window exceeds the rigorous standards set in the Building Regulation (E&W) Approved Document L.


Features and benefits:

  • Includes a polystyrene strip in the thermal break cavity alongside a backer rod situated around the insulated glazed unit.
  • Polyamide thermal barriers are manufactured in accordance with PA66 GF25.
  • Gaskets are manufactured in accordance with BS 3734.


Flexibility:

Available in casement, tilt/turn and top swing reversible windows.


Construction:

Constructed with mitred and mechanically crimped or joined corners, with support chevrons and cleats to ensure accurate alignment. Integral transoms and mullions are fixed into the outer frames with screws or brackets. Joints are sealed against water ingress during assembly.

Opening lights are inserted directly into the outer frames on butt hinges or friction stays.

Vent frames can be fixed directly into the framing modules. Individual modules can be fully assembled and then transported to site. The windows incorporate an integral polyamide thermal break.


Glazing:

  • 28 mm double glazed can be used as standard, but other unit sizes up to 56 mm are possible depending on weight.
  • Each pane of glass is individually inserted into a fully rebated and prepared opening.
  • Various glazing options are available to maximize thermal and acoustic performance. Consult Senior Architectural Systems for details.
  • Internal beading is standard, with external beading an option on outward opening windows.


Size:

- Overswing open out:

  • Maximum width: 1500 mm.
  • Maximum height: 1600 mm.

- Side-hung:

  • Maximum width: 900 mm.
  • Maximum height: 1500 mm.

- Tilt-turn:

  • (Minimum)–Maximum width: (450)–1500 mm.
  • (Minimum)–Maximum height: (500)–1500 mm (heavy duty, 2200 mm).

- Top-hung:

  • Maximum width: 1500 mm.
  • Maximum height: 1500 mm.

General information

Finish

Anodized

Guidance for specification option:

Insert colour requirements, 25 microns (minimum), satin or polished finish available.

Powder-coated

Material

Aluminium

Guidance for specification option:

Extruded aluminium: Aluminium alloy 6063.T6 to BS EN 755-9.


Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_30_59_98_02 Aluminium window unitsPrimary

CAWS

H11/137 Windows/ opening lights

L10/330 Aluminium windows

L10/25 Aluminium windows

Product range

SPW600e Window System

Specification data - Aluminium window units

Standard

To BS 3734.

Dimensions and configurations

As drawing.

Guidance for specification option:

Insert reference.

As schedule.

Guidance for specification option:

Insert reference.

Product performance

-

Weather performance

-

UK exposure category

To BS 6375-1.

Air permeability

600 Pa.

Watertightness

600 Pa.

Resistance to wind load

2400 Pa.

Durability

-

Operation and strength characteristics

Tested to BS 6375-2.

Safety

-

Security level

To PAS 24:2012.

Guidance for specification option:

Security hardware required.

Thermal

-

Whole window U-value

-

Manufacturer guidance

Separate figures are available for Thermal U-values depending on type of window configuration, frame and glazing material, consult manufacturer for details.

British Fenestration Rating Council Window Energy Rating

A–C.

Frame

-

Finish as delivered

-

Coating

Anodized.

Guidance for specification option:

Insert colour requirements, 25 µm (minimum), satin or polished finish available.

Polyester powder coated.

Guidance for specification option:

Insert colour requirements, 40 µm standard and 60 µm available for marine environments.

Colour

-

Manufacturer guidance

Polyester powder coated available in single or dual colour. Consult Senior Architectural Systems for availability of colours and samples.

Glazing or infill

-

Requirements

Insulated glass unit, inside glazed.

Guidance for specification option:

As standard. Insert thickness required, 26–56 mm available.

Insulated glass unit, outside glazed.

Guidance for specification option:

Insert thickness required, 26–56 mm available.

Hardware

Manufacturer's standard.

Type

Overswing.

Side hung.

Tilt/turn.

Top hung.

PlacementType

Wall placement.

Sustainability data

Country of product manufacture

United Kingdom

Recyclability

100

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

4

IFC

IFC2X3

3

Third party certifications

UKAS

UKAS

ISO 14001

UKAS

UKAS

ISO 45001

UKAS

UKAS

ISO 9001

Literature

Introduction to Senior Architectural Systems Brochure

Introduction to Senior Architectural Systems Brochure

SAS SPW600e Overswing Window Technical Datasheet

SAS SPW600e Overswing Window Technical Datasheet

SAS BREEAM Brochure

SAS BREEAM Brochure

SAS CPD Seminars 2023

SAS CPD Seminars 2023

SAS Featured Projects Brochure

SAS Featured Projects Brochure

SAS Accommodation Brochure

SAS Accommodation Brochure

SAS Commercial Brochure

SAS Commercial Brochure

SAS Education Brochure

SAS Education Brochure