Verified by manufacturer 2 months ago
SPW600e Tilt/ Turn Window System [Curtain Wall Placement]
A three chamber aluminium, 75 mm polyamide tilt/ turn window system that achieves impressive thermal performance.
Suitable for educational, commercial and retail applications, transport terminals, health service buildings.
Three chamber 75 mm polyamide window system which achieved good thermal performance. An enhancement to the SPW 600 Suite of windows which introduces a polystyrene strip in the thermal break cavity alongside a backer rod situated around the insulated glazed unit (IGU) ensure the window exceeds the rigorous standards set in the Building Regulation (E&W) Approved Document L.
Performance:
Size limitations:
Features and benefits:
Construction:
Constructed with mitred and mechanically crimped or joined corners, with support chevrons and cleats to ensure accurate alignment. Integral transoms and mullions are fixed into the outer frames with screws or brackets. Joints are sealed against water ingress during assembly. Opening lights are inserted directly into the outer frames on butt hinges or friction stays. Vent frames can be fixed directly into the framing modules. Individual modules can be fully assembled and then transported to site. The windows incorporate an integral polyamide thermal break.
Finish | Anodized Guidance for specification option: Insert colour requirements, 25 microns (minimum), satin or polished finish available. Powder-coated |
Material | Aluminium Guidance for specification option: Extruded aluminium: Aluminium alloy 6063.T6 to BS EN 755-9. |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | H11/137 Windows/ opening lights L10/330 Aluminium windows L10/25 Aluminium windows |
Product range |
Standard | To BS 3734, B S6375-1:2015, BS 6375-2:2009 & PAS24:2016. |
Third-party certification | Third-party-accredited by a UKAS-approved or recognized body. |
Dimensions and configurations | As drawing.Guidance for specification option: Insert reference. As schedule.Guidance for specification option: Insert reference. |
Product performance | |
Weather performance | |
UK exposure category | 2400 Pa. |
Air permeability | 600 Pa (Class C). |
Watertightness | 600 Pa. |
Resistance to wind load | 2400 Pa. |
Durability | |
Operation and strength characteristics | Tested to BS 6375-2:2009. |
Safety | |
Security level | Tested to PAS 24:2016 Enhanced Security. |
Thermal | |
Whole window U-value | Manufacturer guidanceSeparate figures are available for Thermal U-values depending on type of window configuration, frame and glazing material, consult manufacturer for details. |
British Fenestration Rating Council Window Energy Rating | A–C. |
Frame | |
Finish as delivered | |
Coating | Anodized.Guidance for specification option: Insert colour requirements, 25 microns (minimum), satin or polished finish available. Polyester powder coated.Guidance for specification option: Insert colour requirements, 40 microns standard and 60 microns available for marine environments. |
Colour | Manufacturer guidancePolyester powder coated available in single or dual colour. Consult manufacturer for availability of colours and samples. |
Glazing or infill | |
Requirements | Insulated glass unit, inside glazed.Guidance for specification option: As standard. Insert thickness required, 28–50 mm available. Insulated glass unit, outside glazed.Guidance for specification option: Insert thickness required, 28–50 mm available. Manufacturer guidance28 mm double glazed can be used as standard, but other unit sizes up to 50 mm are possible depending on weight. |
Type | Tilt/ turn. Turn only. French casement. Turn only French casement. |
Ironmongery/ Accessories | Manufacturer's standard. Non-locking handle. Locking handle. |
PlacementType | Curtain wall placement. |
Country of product manufacture | United Kingdom |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
IFC2X3 | 2 | |
Revit 2016 | 3 |